Recent content by plasticsnaks

Are you lifted in front at all? Have you tried it in 4H to see if the vibration goes away? If the vibration goes away in 4H it is usually a good indicator that the driver side front axel needle bearing is going bad or has too much play. This needle bearing is what the “ECGS clam shell bushing”...

I’m getting my second post lift alignment today. The shop that aligned my 2025 sport (2” lift front and rear) with JBA uca’s and eibach stage 2 claimed they didn’t need my nor JBA’s alignment numbers . They ended up using Toyota’s specs which had way too much positive camber and positive toe. I...

I’ve only got -100 miles on it post lift. So far, it seems a bit more forgiving vs factory sport suspension. I’m hoping it gets even better after suspension settling and breaking in. My Sport is only a couple months old with 1300 miles. I knew the sport would come with stiffer suspension but my...

Thank you a bunch for replying ! Was wondering if anyone else ran into these front coilovers giving more lift than expected. I’ve read eibach suggests that at factory setting the fronts give around 1.8” to 2” lift which can vary depending on weight of truck. You probably also got around 3”+...

Turned out really nice! I recently also installed the eibach stage 2 (non resi) kit along with JBA UCA’s on my 2025 sport. Noticed in your description you mentioned “bottom threads”. Did you lower the spring perch down to the bottom thread? Only asking because I installed my coilovers with...

Just installed the eibach stage 2 kit on my 2025 Sport 4x4. Also added 3/4” spacers to the eibach 1” rear lift coils to get 1.75” lift in the rear. I wanted to retain factory rake which I did. I also had to crank down the front coil overs to my desired ~2” lift in the front. (When I installed...