Search results

I spliced them then applied connectors

I had the same issue. I have a big light bar up on my roof rack and small chase lights in the back on the bed rack. So in the engine compartment where you plugged in, I switched the wiring of the 5a and the 15a rather than doing it in the back so I could control the specific auxiliary switches...

If any, tell me what affect the additional lift had on the front axles. I’m thinking about this as I carry a lot of added weight, Prinsu roof rack, two Roam boxes with gear, 8 gallon water tank, CBI front steel covert bumper with winch, and in the back have bed rack, rooftop tent, big fridge...

Oh, this is good stuff. The truck doing exactly what it was made to do. Sometimes off camber, rock crawling through mud and water. So a couple questions: I would think operating in 4 low, should not have needed rear diff locker, tires aired down to what?

Like anything, you like to keep things as new and clean as possible. Until you get that first accidental scratch or gouge and then it’s no longer a virgin. I found that the OEM mat was inferior to the Lastfit mats, as it is a little thicker. Whatever, when it gets scratched up or gouged I’ll...

It is a truck! Awesome 👏

On the way home to Florida from my Colorado/Utah/Idaho trip last June, I stopped in rural Alabama at the Toyota dealer where I bought the TH for the 15,000 mile service and also let them assess the tailgate warning light coming on. Most of the mechanics and also the service manager were offroad...

Honestly, I don’t know why someone would mount them there, they’re sort of in the way of normal movement around the back of the truck plus with any offroading or overlanding, the lights should be up higher for visibility from a distance in dusty conditions or heavy rain and they are called chase...

I'm relieved that I did not have an issue with this while using MTS software out in the wild because I needed the cameras while rock climbing in Colorado and Utah. I have noticed that keeping the camera lenses clean is a must, but this is something that cannot be helped sometimes out in the...

I had this same thing happen to me today, second time this week. I started a new thread to day because of this.

Has anyone encountered that their 14 in display goes dark sometimes when the cameras are coming on driving slow or in reverse or out of reverse to very slow drive when the cameras are normally on? I put it back in park and the display came back on. Cut the truck off and the everything went...

Yeah, that’s usually the way it is, if you buy Maxtrax that’s all you get, the mounting hardware you usually purchase separately because there’s so many variations for mounting.

This is assuming you bought the board mount kit

Watch this video starting at 1:22 https://a.co/d/7BNypb6

You don’t need that bracket, mount the pins directly onto the track using T slotted bolts and screw the pins onto the bolts.

Those look like all top boards and in the Amazon all top store, they have universal mounting pins for T slots https://a.co/d/d0ATv1v

If you want to spend money like I did, Kuat is the way to go using Ibex system. I will be adding the panels to enclose the bed, probably next year, and also on the bed, I will be adding the Decked system.

Crickets as far as I know

So have you tested these magnetic mounts on dusty trails and in water crossings?

Moundman, what’s up with this? AluCab?