Search results

My Alu-Cab Contour Canopy already has a rear brake light wired in. I’m hoping to regain the digital rear view mirror with the extra camera - all wired inside and under the vehicle, without disturbing the rear brake light/camera assembly on the back of the cab and risking leaks…..

Hi, I plan to retain the digital rear view mirror and have purchased the GGOFFROAD harness. However, I am opting to leave the original camera in place for possible future use. Instead I purchased thru Toyota.oempartsonline.com a second camera (part # 867C0-AK010) and harness (#86797-0C360)...

Multiple phone calls to Lexland’s Customer Service only resulted in recordings saying no one was available to take my call. Email to them resulted in a response that asked me the year and month my Taco was made, suggested I cut the item to make it fit, and offered me a 25% refund!! So they want...

Hi I am experiencing a grinding sound when turning when I have the steering at full right or full left. Made me think something was rubbing- but examining tires in that position everything seems clear. Have stock tires and wheels (2026 OR). Anyone have a similar experience? Any ideas? Thanks

Bought the Lexland grab handle and attempted to install it today. After an hour of swearing I placed it side by side with the OEM I removed. Lexland’s is about 1/2 inch longer! Did theybsend the wrong one? Box is labeled 2024+ Tacoma. Just emailed their customer support for a refund . Will...

Given your offroad activities I think you’d find the sliders with or without the kick out good protection for your rocker panels from small boulders and trees. Some manufacturers offer then without the kick out (Cali-Raised), and some with a kick out that doesn’t protrude too far (C4...

In liked the fact that Miller Cat’s was stainless- when I put together my ‘wish list’ not all pieces were available from all sources…. Miller Cat now offers a bit more for the 4h gen….. Also: stopped by Cali-Raised facility in Ft Worth just after Christmas…. One of the cofounders took 45” to...

FYI: I had the “Ammo Box” slide installed. The Front Runner Wolf Pack boxes I use in my Sprinter van fit on it perfectly! Ordered a few more to keep dedicated to the Taco…….

OK4WD in NJ installed my Alu-Cab Contour Canopy (I didn’t want to tackle the installation in the Vermont winter!). They did a fantastic job. Two days of pouring rain here this week - not a drop of water inside. It’s built SOLID.

Just installed skid plates and sliders on my 2026 OR. A mix of Cali-Raised, Miller Cat, RCI and Westcott. ALL are beautifully done and had perfect fitment. TIG welding on the Westcott sliders is SUPERB- but for some reason my wife just didn’t ‘get it’ and couldn’t comprehend my enthusiasm……...

RCI needs to up their packaging game. As I wrote in this forum a month or two back, my rear differential skid plate from them arrived with ZERO packaging aside from a plastic bag it was placed in. The plate had punched through the box in two locations. Fortunately it wasn’t damaged. I sent RCI...

Fella doing the PPF on my new ‘26 OF suggested these hood add-ons and ‘TRD’ color change. I think it came out looking great on the bronze oxide…

Thanks for the pics. Kuat is slick. BTW -what light bar is on your Prinsu? Prinsu checks pretty much all my boxes…….

Debating which roof rack to get for a 2026 OR . If anyone can help with some questions I would appreciate it. 1. Anyone have experience with the new Küat/Diode Dynamics rack? Weight capacity is a bit light , but looks functional. 2. Anyone significant problems with paint erosion where the wind...

I often park my vehicles in an open, mowed field. Mice have always gotten into their cabin and engine air filters. With my Tundra I finally blocked the opening with stainless steel screening…… that has been successful so far……

Minus 16 this morning in Vermont and mine was pouring out hot air before I got 2 miles from the house.

Update: Westcott informs me all of the bolts on the bottom side need rivnuts. Some hokes need to be drilled out to 11/16”. Rivnut mandrel needed is M12

Very few of the sliders out there utilize attachments points under the frame. Those that do must be using rivnuts or something equivalent if the holes aren’t threaded. The main stress from lifting would be borne by the side bolts and the tensile strength of the 1/4 steel I would think (though...

The Westcott installation video on these from a year ago only mentions the forward square hole needs to be drilles to 11/16 and a rivnut placed. Only mention of the other bolt holes underneath is a statement to initially hand tighten the bolts - implying those holes are threaded. Did the...

Thanks very much for taking the time to measure this. Quite a taper. Not sure whether it would be worth messing with anything beyond the cross bars. I'm having the canopy installed the first week of March by OK4WD (NJ); I too am getting the 1450mm bars. Going back and forth between the...