Search results

3 hours with tech support, a little welding, and a prayer. Behold…, knob 2.0. Took less than 5 seconds to swap out. So much better. Part # 90011-23050.

Welcome and congratulations!

The passenger side cab to frame bolt cover-plate causes a rattle on my truck.

I have the MagnaFlow Overland system with the side sweep. Zero drone, quiet in the cab. Maybe moderate sound level outside. Deep mellow sound overall with some added hiss under load.

Happy 4th! M8 x 30mm from the instructions that came with my running boards.

Have about 5k miles on a set of XTMs. They are very surefooted, especially in the rain. Surprisingly quiet as well.

If you dont find a set closer, I have a set down here in Cali.

To all you Truck Dads out there…, Happy Father’s Day! Feel free to post one or two of your favorite random truck pics! My baby girl helping with an oil change.

For a quick reference, here is a copy of the OE torque specs.

The email replies I received from Hellwig were short and very poorly written. I assumed their customer support wasn’t local and they wouldn’t have experience with the product. Also, my concerns/issues would require a redesign. So the bar was returned for a refund. It was good chatting with you...

On the plus side, install is a snap. Messing with the driveline probably took the longest. Once you have the bars side by side you’ll see how impressive the Hellwig bar is. The weight difference between the two made me laugh.

I ran the Hellwig rear sway bar for a few months then returned it. At first the truck took corners like it was on rails. After about two weeks the stock tail lean returned. Re-torqued everything. All was good for another few weeks. Again, the lean returned. I compared the torque spec from...

Installed a pair of left and right bed storage boxes. Thanks to Jlevitt95 over at Tacoma World for and excellent write up to reference. https://www.tacomaworld.com/threads/adding-back-the-driver-side-bed-storage-cubby-on-2019-models.818770/ Found the boxes on eBay for $150 delivered. Listed as...

Recovery tow hook set - front and rear. Aluminum construction. Used - $175 - free shipping.

Thank you for going the extra mile to try and resolve this issue.

Took a 6 hour trip up north to revisit Surprise Valley Hot Springs. Spent a day exploring the Alkali lakes and up over into Long Valley Nevada.

The Trumgeta running boards were short lived. Passenger feedback didn’t care for the height and how far they stuck out. While removing them, I found multiple rust spots already starting on the brackets and on the running board’s bolt retaining washers. Installed Go Rhino‘s RB30 Slim running...

Thank you! I’ll be in touch!

Been OTT tuned since October of last year. About 3 weeks ago I removed my AEM DryFlow filter and OE intake. Installed the Banks intake and Immediately felt an overall power difference. Mileage has settled with a .2 mpg improvement. Wasn’t looking for a mpg boost but that, the extra power and no...

I start to lean towards A, but they all still look a bit too much like an afterthought. I understand the mirrored/simple designs will keep costs down, but I feel the shape is too generic and does not complement the truck. They could use more character, differentiating the front and rear shape of...