A few months back I installed a 12v outlet in my truck bed and a low voltage cutoff by my battery to prevent from draining it too low. I initially set this to 13v thinking this would be enough to start, but I found out a couple weeks ago after accidentally leaving a portable power supply plugged...
You should be getting way better than 16, but when I first got my truck it took the computer a while to adjust to the final numbers. Can't remember exactly how long though. I have a bunch of stuff on mine (rock sliders, lone peak camper, 270 awning, bed molle panel) and I am averaging a little...
The Dobinsons USA website is updated now with fitment information of the C59s on the 2024+ Tacomas. Thanks gofastdan for starting this! I just bought a set of the 817s from Mudify on early black Friday sale- $235 with no WA tax and free shipping, but I have to wait until January for the black...
I drilled a hole into the front corner of my bed to get a 12v dc plug back there. Ran the back of the plug into a waterproof receptacle (had to remove the wheel well plastic to access this area) and ran 10 gauge wire from there up to the battery along the inside of the frame. I also ran the wire...
I have a manual tranny with a little over 3,000 miles and definitely no knocking noises. Should be just as smooth as the autos. Not sure if that's one of the tsb symptoms but I would take that in asap.
I have a short bed off road and went with the loan peak primarily because of cost and internal space/ access to bed with my daughter sleeping below. I got none of the add ons lone peak offers so I am at the lowest weight camper they sell (which I believe is more like 350 but I didn’t weigh...
Thanks for these details! Getting my LP on October 11th and will be looking to do some reinforced coils as well. What did you use to lift your truck high enough to install these?
I just picked up a 6MT trd off road on Saturday, have about 100 miles on it now, and am loving the way it drives. I'm coming from a 5 speed 2017 Crosstrek and this thing is way funner to drive. I haven't had issues with the 1st to 2nd shifts (it's kinda fun hitting 2nd at 3500 and feeling the...
I went to install my step edition/no filler plate/kickout sliders on my short bed trd off road yesterday and ran into a couple obstacles that weren't covered in the installation video. There weren't written instructions included so I was just trying to use that as my guide. Are written...