Sponsored

Search results

  1. Amazon Skid Plate

    Does the wind deflector fit back on with the this skid plate installed?
  2. 4th gen installation of RC AMP electric running board wiring issues

    So, I was able to work out the wiring issue. For anyone else doing the install I have attached a picture of the correct wiring. Also, be aware that the motors will run backward out of the box and you will need to reverse the two wires going into the plug to get the correct orientation. Hard to...
  3. 4th gen installation of RC AMP electric running board wiring issues

    Here is a picture of the plug that needs to be tapped. One can see that there are several white wires. I was trying not to have to tap each wire separately to see if that was the correct one.
  4. Controlling my Rough Country Power running boards with a factory switch

    Thanks so much for the suggestion. I went ahead with a new post.
  5. 4th gen installation of RC AMP electric running board wiring issues

    OK, so I just received my AMP Research powerstep from Real Truck to install on my 4th gen Sport. The installation took awhile and then when I got to the part in the manual to connect the OBD plug to the truck's wiring system there is nothing in the install manual that tells or shows you which...
  6. Controlling my Rough Country Power running boards with a factory switch

    OK, so I just received my AMP Research powerstep from Real Truck to install on my 4th gen Sport. The installation took awhile and then when I got to the part in the manual to connect the OBD plug to the truck's wiring system there is nothing in the install manual that tells or shows you which...
  7. Greenlane Offroad Engine Skid Plate on TRD Sport Premium Supersonic Red

    Perfect! It has been difficult to find a skid plate that doesn't restrict reinstallation of the air dam. Most manufactures have indicated that theirs are not compatible with the air dam. So, I am glad to get your response from someone who actually has done an installation and would know if it...
  8. Greenlane Offroad Engine Skid Plate on TRD Sport Premium Supersonic Red

    I was wondering if it would be possible to reinstall the chin spoiler. I know I am in the minority, but I would like to keep it on and replace the flimsy felt.
  9. Installed MCX skid plate

    I like the way this skid plate looks and the access to oil filter and drain. I was wondering, will this work if you want to leave on the chin spoiler. Please no comments on the way the chin looks. I have looked at other skid plates and one can't leave it on. Thanks
  10. Fang Light install, why is everyone pulling the fender /bumper apart instead of doing this

    I installed these lights on my Sport. I first tried reaching down from the top like the video shows. No luck. Then tried partially pulling back the flares and reaching toward the front. Again to difficult to get factory clips to release. All this to say, I ended up pulling of the front grill...
  11. Carista OBD2

    I purchased the Carista and made the standard changes others have done. I made a list of Features that can be changed and the possible settings in an Excel spreadsheet. This was easier for me to see the options for my interest. I thought this list may be helpful to other rather than the...
  12. Cold Air Intake CAI System?

    I was considering installing an aftermarket cold air intake system. I don't have any experience with them. So, I was wondering if anyone out there does or is considering an installation. There are claims in adds 15 HP and 17 Lbs x Ft. TQ. Also wondering if an installation will require...
  13. OEM Trifold Hard Tonneau Cover PT954-35240 installed on 2024 Tacoma

    BadApe - I believe I have the exact vehicle you have. I just ordered the OEM tonneau cover, give all the discussion here. I did have a question, do you like the tube steps. I am thinking about those a s well,. but didn't know how functional they are. Was going to order with the 20% special...
  14. Controlling my Rough Country Power running boards with a factory switch

    Thanks for posting this information on the switch. I am waiting for the AMP plug and play power running boards to come out (if they ever do). I just can't bring myself to have the magnetic switches attached to the door and door column. The AMP boards use the OBD port to provide the trigger...
  15. OEM Trifold Hard Tonneau Cover PT954-35240 installed on 2024 Tacoma

    Well, I ordered the BAK MX-4 and had it delivered. After much review I decided to go with the OEM cover for several reasons. With the BAK you loose the ability to have a divider (with some slight modifications needed to the divider) and use the rail tie downs, because the clamps with the BAK...
  16. OEM Trifold Hard Tonneau Cover PT954-35240 installed on 2024 Tacoma

    I assume so, but not having one I can't say. Perhaps calling manufacturer to get answer.
  17. OEM Trifold Hard Tonneau Cover PT954-35240 installed on 2024 Tacoma

    Looks like I am going to have an extra one. I ordered from two different places to try to get the earliest delivery. Who thought they would ship on the same day. So, if you or anyone else would like to purchase, let me know. I paid $1,109. I would sell for that amount and purchaseor pays shipping.



Top