Sponsored

Search results

  1. What's in the center console under the dash ??

    the ECM. (electronic communications module) lives there. It phones home on you whether you want it to or not.
  2. Aftermarket/OEM Infotainment

    Following up on this thread -- can anyone say if the 8in screen and 14 in screen units are directly interchangeable regarding the surrounding dash trim? meaning: is the dash trim opening the same width or will you have to buy new trim as well when going 8-->14. or 14-->8. ??
  3. For people who don’t like the silver wheel ring: TVD Vinyl Decal

    Tried 'em. Look good but fragile. Dismounting and remounting a tire peels them up. Winter weather peels them up. the edges come loose and look crap after that.
  4. 2.4 Rattle / Knock noise under load - does yours sound like this?

    i went with the plain foil backed foam pads from amazon https://www.amazon.com/dp/B09MCSZ6G7?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1 and the Victory engine cover with Dynamat on underside. They both help "somewhat"/
  5. 2.4 Rattle / Knock noise under load - does yours sound like this?

    Good call. I have already added underhood noise damping tiles from amazon. That recording is from inside engine bay for obvious reasons. It's still a lound nasal rattlefest though.
  6. 2.4 Rattle / Knock noise under load - does yours sound like this?

    thanks for the prompt reply. Anyone else have similar rattle?
  7. 2.4 Rattle / Knock noise under load - does yours sound like this?

    Vehicle is 2025 Tacoma SRT sport with ~2,200 miles. The engine always had with a mild rattle under load (acceleration or hills) from week 1 and it's gotten louder. I would like to know if your truck sounds similar when acceelrating or climbing a hill ?? This is an under hood recording...
  8. 4th Gen Tacoma Engine Cover Install (Victory 4x4)

    I installed one of these with some 1/8in killMat rubber sound matting on underside. Makes a significant reduction in injector noise / engine clatter under acceleration.
  9. Removal of panel around chargers

    can confirm this panel does just pop out. Use a plastic panel tool or plastic paint scraper to get it started.
  10. disabling DCM / telematics in 2025 Taco

    Here are two articles on data collection and how auto makers are sharing your data with insurance companies: 1. https://www.komando.com/tips/privacy/car-companies-collecting-data/ 2. Automakers Are Sharing Consumers’ Driving Behavior With Insurance Companies "What it contained stunned him...
  11. disabling DCM / telematics in 2025 Taco

    Posting a how-to on grounding out the antennas used by the DCM telematics module. This post is not a debate about the puposes of telematics communicating data back to a toyota service center ,or legality of same -- only a how-to for those interested. Background - why bother? - All recent...
  12. Remote start

    You can remote start with the remote control without the connected services. Three presses with a hold on list press. There's a video on the facetube.
  13. Air dam removal from my 2024 Tacoma - process & photos

    I can confirm that with chin spoiler removed, a truck with Sport skid plate will get a significant howling wind noise that sounds like tire hum between 35 and 50 mph. You might think your tires are faulty. It's definitely wind moving through the front bumper or arms. Replacing the spoiler...
  14. Engine Noise - Sounds Like Valves Tapping on Acceleration

    I insulated the underside of the hood on my 2024 with a kit of generic expanded-foam & aluminum foil squares from amazon. For short money this reduces the 'valve clatter' (injector?) noise by more than 50%. Specifically the treble half of the clatter goes away. It's miles better IMO than...



Top