Many have experienced the same with the manual seat height adjustment. Some, including myself, found that when getting in or out we were sliding across the hand and subsequently lowering it a little at a time.?
If you live in a climate that utilizes salt in the winter for road maintenance never put aluminum aftermarket caps on your valve stems.
Dissimilar metals and a corrosive. They are nylon for a reason
had to soak them in nuts off, heat them and utilize (2) vise grips to easy them off. Ugh !
I disabled traction control while traveling some difficult road conditions recently. Noticed that when speed exceeded 30 mph the traction control disabled dash notification disappeared and TC was reenabled .
typically once disabled TC remained disabled until it was reenabled my the driver or...
Be careful carrying unsecured weight in the box. Wet sand freezes and becomes a missile in the event of a collision.
Have a friend that had a significant front end collision with precast concrete weight bolted down behind the wheel wells. 1 of those 150 lb weights ended up in the empty...
I believe + offset applies more to tire width and rub on the inside of the wheel well.
The spacer lift slightly stiffened the suspension but with the Toyo C load I really didnāt notice a change in ride from OEM. As far as noise they are quiet now. Time will tell as they wear but expect that all...
As noted earlier Iām running 285/75/17 Toyoās with a Westcott 2 1/2ā collar lift on my OR. I hand the lift installed immediately after receiving the truck. Initially there was 0 rake after the lift was installed. A few months later the measured rake was 1ā. I attribute that to the coils seating...
The 2 1/2ā lift allowed the 75 series tire without any modifications. The Methods are +35 and poke is exactly an inch. Do a search , I posted straight on pictures in April I believe.
After some research I opted to go with the Toyo Open Country AT III 285/75/R17 C load rating on my OR. The truck has a 2 1/2ā spacer lift. Tire pressure 37 front 34 rear. Tires are 20 lbs heavier than OEM sacrificing about 2 mpg. Ride quality and noise is comparable to the OEM. Time will tell on...
From initial thread engagement the subject lug nuts provide 11 full rotations of thread contact before seating in the wheel. The profile is the same as your example.