Search results

@tacorancher @SmokyMtnTaco Shoot me an email with your Shipping Info for the both of you to info @spvparts.com I just got these in today and wanted to get the first set out to you today. I wanted to be sure I didn't mix up your call handle with someone else's address/names. Be sure to...

No problem! As long as you are happy and it is doing as you want, I am happy. Just an FYI for the Future. You can add switches with the Diode D Switch- https://www.specialtyperformanceparts.com/products/diode-dynamics-d-switch-8-channel-switch-panel?_pos=1&_sid=e7d039620&_ss=r Or the Spod-...

Ok. So what I meant by "connector" is that the trucks that CAME WITH switches and the ARB Bumper included a connector that was wired from the front engine bay to connect to the built in switches. So you don't have to run any wires with those at all. If you don't have that (and you don't) I...

So you added an ARB bumper? but you don't have the pass through wires/connector in the bumper? Is that right? If so, you can just run a power lead back to the rear along the frame and up to the engine bay to connect to your switch. Did you get our kit with the tail light adapter? Or just the...

So a couple things. I think you said you do not have a connector in your bumper for the switches? Is that correct? If you have the connector. The White wire I believe is the ground on your pig tail. You could simply take your OEM Rear pig tail, and cut the ground ring off and crimp the two...

Thanks for the feedback. Yeah. It's understandable that some people prefer to do their own wiring or manual installs. I just thought I would share the point of the harnesses, adapters, etc. The harnesses are part of a system. Meaning the short rear harness can work with a Toyota, F-150...

Instead of having the wires from the front connector permanently connected to the patch connector to the rear. You can plug any of them to any switch in any order or any of our harnesses. John

4432238639 Correct. The connector that the wires are in is the same from 2024 and 2025 up. The only difference is, some of the newer trucks have 4 switches. The others have 3. If you have 3, the 4th wire is just a dead end. No power, no switch. That said, I am guessing you can probably add a...

@tacorancher @SmokyMtnTaco I can send you guys the first 2 of these when they come in, if you want to take some photos and shoot another demo/install/review video? I can add it to our Youtube playlist again as well. This will just replace the "Patch Cable" under the hood with more...

These kits are for the NON ARB Bumper and just bolt under. No cutting. https://www.specialtyperformanceparts.com/products/2024-up-toyota-tacoma-under-mount-rigid-sr-l-reverse-light-kit-plug-n-play-srl-not-for-arb-bumper?_pos=77&_sid=b3532bcdf&_ss=r John

I'm sorry you feel that way.. but I am always more than happy to help. In short, while it may seem more confusing at first. The key is to make it easier. It is easier to plug something in than to manually cut and splice wires. So the key is to make things plug n play and have less chance for...

You can also email us directly at info @spvparts.com So what I think you are saying is you have the under hood pig tail for the Aux switches with the bare wires. You didnt get the other version that has the 2 wires that lead to the 2 pin connector to patch through to the rear connection...

So this question comes up a LOT... It is a yes and no answer unfortunately. We do make adapters that do just that. Brake, Turn, Running, Flashers and Reverse. The issue of having it available for the Toyota isn't the harness availability. Its the lights themselves. Rigid SRL lights are a 3...

Yes... And you are right. Toyota does make it a bit confusing. So in this case.. (I assume yours is a 25?) The Black wire is Aux 1 and Green is Aux 2 (Or vice versa) Toyota uses a white wire with a Black stripe for a ground. The Ground is BUILT IN to the REAR connector from the body. So in the...

In terms of Stock harnesses from Rigid. They don't offer a "Plug N Play" option. For the 360 Series lights. They don't come with a main harness at all. So you would need to buy this one... (3 Wire Harness. Bare wires. Relay built in and rocker switch which you would cut off because you have...

Sure... Ley me explain. This is the OEM Harness that comes with the truck As you see... It is ONE piece and it preassigns Aux 1 and Aux 2 to the rear connector in the bumper. You can't select Aux 3 or Aux 4. Its straight wired to Aux 1 and Aux 2. Even if you wanted to just use ONE switch...

We actually have several light kits, headlights and other things for the Tacoma that can be found here- https://www.specialtyperformanceparts.com/search?options%5Bprefix%5D=last&q=tacoma John SPV parts info @spvparts.com 317/934/6778

Yeah we have those here- https://www.specialtyperformanceparts.com/collections/flashlights-and-other-lighting John

Discounts- Tacoma Forum Members can use Discount code - TACOMAFORUM100 John SPV

New Product incoming- We want to make things EASIER for everyone. That's why we came up with our fully patented plug n play harness system. To eliminate cutting and splicing wires. Cutting vehicle wires and so on. You can check out the introductory release featured back in 2021 on the Motor...