Recent content by GoodMoodley

2024 Off Road Premium Cargo Net

I used a small grommet. Fit perfectly and seals the hole.

The light bar works fine. Sorry no pics at this time. It is quite bright for my purposes. It fits in the slot no problem but I had to come up with a mounting solution. Used some screws in to some thicker parts of the plastic surround with thin stainless wire to secure the bar in place. Works well.

I have the same issue as well. A little wonky looking. Will shim it at some point.

Did they change the bracket design? I recently installed the one I received from their last major shipment. My step is sitting a little crooked with this bracket.

I was just complaining about this to my wife yesterday while we were on a drive. Thought I was doing something wrong.

I have the same setup. First pic is right after I installed the front All-Dog leveling springs. Second photo shows height after springs settled. Have had no issues before or after the springs. Tires are Toyo Open Country A/T 3 285/70/17.

Just installed an OEM TH grill - 53101AK070 - with a Rough Country light bar. Also threw on a set of the LED Fangs while I had the front end off. Install was pretty straight forward.

Here is where the alignment ended up. Drives fine

No reason other than pricing was good and I think they look cool. I have red lettering on the tailgate and red tow hooks.

Should line up with no issue. There is plenty of adjustment available. My stock setting was pretty much in the center.

When I installed the springs I made sure I marked off the camber adjusters on lower control arms and maintained their position when buttoning everything back up. Toe settings were fine as I did not touch the steering end links. The lift added noticeable positive camber however. Vehicle drove...

Follow-up from my front spring install completed yesterday. Took it out for a little drive today and they have settled a bit. Dropped about a half inch from yesterday. Just barely sitting higher than the rear at this point. Happy that it did settle before I take it to the alignment shop this...

Will have to get back to you on that. Only took it out around the block a couple times. Will take it in for alignment tomorrow and will be doing some longer distance driving this weekend..

Just installed mine today. Also installed a set of OE Rough Country upper control arms. Install was fairly straight forward. Currently sitting about two inches higher. Hoping it settles. Taking it in for an alignment tomorrow. Sitting higher in the front now by about an inch.