We got a nice feature on SXTH's blog:
https://sxthelement.com/blogs/sxth-element-blog/real-world-results-camtuning-s-2025-tacoma-trd-off-road-dyno-testing
I'm back from those days too! The Greddy Profec B was high tech.
We do increase the boost on these via the ECU, and it's increased from 3-5psi over stock.
Weekend update! E30 tuning with the intake and intercooler. Torque is up 128 and hp is up 105 in the mid range vs stock. I was able to flatten the torque curve significantly.
E30 ethanol blend made another big jump. I have a content gauge on the truck and this was 30.1%.
I put the cursor on the graph to show the +128wtq and +105whp in the mid range. The torque curve is so much flatter than stock. I daily drive this truck and have put almost 8000 miles on it since the...
Great questions. The MAF is typically rescaled if the diameter changes. This is not difficult to do in the tune and once rescaled it can be confirmed with datalogging which you can email to me. T
The AFR in the dyno charts I posted did not have any MAF rescaling.
I see you're in Hawaii, so I...
I have not. Are they claiming the catback is the restriction, or the downpipe? In all of the turbo 4 cylinders that I've tuned over the years, the downpipe is the restriction until you reach fairly high power numbers (500-600+). Most of the new turbo vehicles I've been tuning have stock cats...
You're correct! I still have my first WRX, my son has an 08 Outback XT manual with 345whp on flex fuel, my daughter has an 09 Forester XT Auto with 330whp on E85, and the wife has a stock but tuned 2020 Ascent.
It's difficult to compare these trucks to an STi for 2 reasons:
1. STi is easily...
Thanks for the comment. If you are asking what the difference in the 2 lines of the same color are, one is horsepower and one is torque (measured at the wheels)
Here's a single graph for better explanation- RPM is on the X -axis, and in this case the Y axis is scaled the same for HP and TQ...
We spent the whole day on the dyno today and have positive results to share. This was all tested on 91 octane (no ethanol added, so E10).
SXTH intake was on the truck and we did a couple of pulls on the stock mapping, then on the map that produced 309whp a couple of weeks ago. Then I did some...
My SXTH Element parts came on Friday and I have the intake on. Drove the truck almost 6 hours round trip yesterday to watch my daughter race districts for cross country (They won!). I datalogged the whole way there on both my tuned map and the stock mapping.
I'll head to our dyno in a couple...
Cobb Tuning has 10% off on all products starting 10/31, going through 12/1.
I have reflected this discount on my site:
Toyota Products and Tuning - CAMTuning
The first 10 orders can have my dyno and road tested mapping for free with the purchase of an Accessport from CAMTuning.com using code...