Search results

I could be wrong, but it looks like your SAI (Steering Axis Inclination) & scrub radius is incorrect. It’s usually knocked out of factory specs, by changing upper / lower control arm ball joint locations when aftermarket control arms are switched out. You can have everything in “green” as they...

Yes. I can’t see it where it’d be useful on a daily driver. If you were not driving your truck for two or more weeks, then it’s a good idea.

www.12volt.Solutions makes remote start kits that are plug & play. 3 options - OEM key fob, kit with 2 fobs (1 mile range) or phone app. They have the kit for ‘24 Tacomas. Get in touch with them, I’m sure they’ll tell you if it’s compatible with your ‘26. Compustar is good also, extremely good...

As long as you have the room to install one, buy a battery disconnect post. They work great, and you never have to carry tools. https://m.media-amazon.com/images/I/51JgRJK7oLL._AC_SL1200_.jpg

Yes they do. It’s a shame though, especially what vehicles cost nowadays.

Correct .4” taller. Optima DH6 7.5 X 6.88 X 10.94 Dimensions (H x W x L) (in) Odyssey ODX-AGM34R (34R-PC1500) Length - 10.90 in Width - 6.80 in Height - (terminals included) 7.90 in At least you have a few options. The hybrid trucks are tough, there’s just a limited amount of room. Odyssey...

My apologies, I was looking at batteries that were comparable to the Optima’s. Here’s the extreme series battery. It is approximately .4” taller than an h6. You would need to measure your battery enclosure to confirm that it fits height measurements...

Not the cheapest, but very close to the cheapest. Buy a group H6 Odyssey battery and be done with it. https://www.odysseybattery.com/products/odp-agm48-h6-l3-battery-48-720/

Unfortunately batteries are one of those products all manufacturers skimp on, to lower vehicle manufacturing costs. As someone that has been turning wrenches for 39 years, I’ve replaced tons of batteries, OEM, cheap & high end. Batteries in newer vehicles are not the same quality installed in...

Directly below the two connectors you have disconnected in your picture, there is a third connector that goes to the grill shutter actuator. Disconnect that connector. The grille shutter harness connector is exactly the same style connector as the two you have disconnected. About 2-3” behind the...