Search results

It would cost double

Hybrid engine is the same as non-hybrid, these all can run on 87 fuels, but do as you like and run whatever you want to :)

I am like 95% on this size M10x1.25mm pitch (uses a 14mm wrench)

I am pretty sure 60mph is the max speed 4WHI will engage when activated not the max speed in the range.

The 4 holes that need to be plugged on the lower A-Arm are angled slightly down and the main drain hole on the bottom is where all the draining will occur.

no the 3 straps come thru the back of the seat, once that flap is unclipped you connect the 3 straps for the seat cover and you push that flap up into the rear seat cover you see nothing and cut nothing

you have to unclip that flap there on stretchy cord connected to the seat, unclip that and bingo

They fit perfectly fine, Raise the seat all the way up and you can easily get the straps over the bars without issues. 

hopefully that Nosie you hear is not the fake engine noise getting pumped thru the sound system

Bump

I removed the rubber cap, then disconnected the snorkel inside the inner fender and then blocked the rest of the snorkel to the passenger side, this kept the air intake from the inside fender well and under the hood.

problem is the mount is backordered like 4 weeks sooo I'm waiting on that from the dealer, also able to remove the mount in the spring or when it needs to go to the dealer.

There are different settings for the brake engagement, try resetting back, hold the parking brake in till it changes settings and again to re enable the automatic braking. just a thought.

I have the carbon trim, center console protector, hidden storage and cupholder inserts, everything from them has been really good and would buy it again. currently testing there 14inch radio storage unit

Snoway makes a complete setup for the truck that mounts using the front tow hook and frame area. It’s what I’m looking at. Wireless controller and no lights just driveway plow.

interesting, No one? :)

Looking to see if anyone has put a snow way plow or any plow on their 24 hybrid, what does the plow mount look like? wiring to the battery in the rear seat area? any issues overall? what if anything needed to be removed or trimmed to use the plow mounts?

Yeah I was referring to the splash guards. I did install them and they can easily go into place with wheels on.

There is no need to remove the wheels.

Tried this out it helps until window is past that part of the frame, the real noise maker is the primary section that runs the length of the window front to rear, shaking the window a little expose that trim to be the f-ing Nosie of all time.