Search results

Yes. It won’t stay on when the truck is off. It will only work when truck is on

I installed blue light in my footwell. It replaces the oem ones. These fit on my trd sport not sure about the other models these work just like oem bright when not driving and truck on and dim when driving

Being that you used the ign fuse have you noticed your raptor lights coming on randomly while truck is off?

I’m having the same issue with it randomly turning on at least once at night that I know of when I come home from work. I used the ign fuse with add a fuse. Now I’m wondering if it happens every time I turn off truck. Never noticed it until Saturday now looking back at my security cams at home...

Which fuse did you wire the fang lights in to?

Has anyone installed a fire extinguisher mount in the interior of their truck? If so please show pic and where you got it from. Mahalo

You can’t see it in this photo during the day but at night the outline of the Tacoma black letters are reflective blue

Same with Apple phones. It’s cool

Red wire is power you can tap into the turn signal beige/pink wire. So red (power)and yellow (turn signal) wires together tapped to the turn signal. But it’s best to route the red to the fuse box using add a fuse 10amp

Just installed the pro with my 4th gen trd sport with the 5pin plug and play. Set it to timed as I’m a bit scared to leave it in continuous mode. I haven’t tested how long it runs when truck is off and not running. Battery seems normal according to gauge on dash/screen.

The oe fog lights on the 4th gen suck. They aren’t as bright and if the bulbs were replaceable I’ve done it already. Hoping lasfit comes up with something that isn’t quite expensive, worth it, and plug and play.

Mine rattles as well and the rear passenger side too. Haven’t found a fix exactly. The only thing I do is roll it down a bit more and it won’t do it.

It’s from AliExpress not sure of brand

UPDATE: this pic/video was testing phase. Attach black wire (ground) to engine frame, red (power)to ign fuse in fuse box with add a fuse 10amp, yellow (turn signal)tap into beige/pink wire(driver side) blue on passenger side) and white tape off not necessary.

I only know of one other guy on Oahu that has this on his oxide color truck.

Yes they should if yellow wire was connected to the turn signal

This is how I originally did the install. Tried to upload video but was too long. I rerouted the red wire to the ign fuse with add a fuse. It works perfect.

Has anyone had issues with holding the lower seat up with the tether button? Specifically when you have put seat covers on. The tether from the lower seat is now shorter and barely even gets close to the button to snap it in place on the back seat. I needed to go in the storage several times and...

Can you take a pic of where you tapped into for the fuse tap into the accessory slot? Also if you used add a fuse what amperage fuse did you use? Pics please. Also the signal wire taps into your blinker peach colored wire. Photo showed is from a fb member. This is the route I was going to use if...

I’m wondering if you could access the “fang” “cover, front bumper hole” (part #52127G) from under the bumper peeling back the felt wheel liner and access from above the headlight. I really don’t want to take the bumper off.