Id be willing to wager you'd spend more time messing around with the bracket and mounting/remounting than if just did the calibration procedure.
It seriously takes 3h or less with focus, the space, and having everything on hand that you need at the start.
I and a few others have made some...
If you can to the TH/Pro grille, the mounting screw arrangement will not allow you to install your existing bracket in the same orientation. It will force it flip over. And when it flips, your camera angle will be massively wrong. If you want to have a hope of of things being correct you have 4...
If you are in normal and "d", then it should be super smooth other than an extremely mild sensation of the ice motor starting up that matches perfectly with the tach jumping from zero to about 1k rpm, then climbing. Anything else needs to be looked at by the dealership
I thought I would have room to spare, but when I measured I goofed and didn't consider the leading 'lip' of the cover (since it a canister Roll-n-Lock). So under the cover I have ~1" of space, but with the lip, I have to remove my bed mat and I clear by 1/16". My bad on being greedy to see how...
https://www.igloocoolers.com/collections/icf-electric-coolers
https://www.amazon.com/dp/B0CSRNXTHM
The ICF60 *just barely fits* in the bed under my closed tonneau cover if there is no bed mat in place. So depending on your setup, I would take some measurements first to figure out your size...
By trial and error, I've found it always rolls over to the 'previous' screen gauge (one up). Even if you set that side to allow nothing but TPMS, it'll roll over to 'blank'.
As much as it's frustrating and shouldn't be necessary, I've gotten in the habit each time where I didn't even have to...
Do you have 360 camera system?
Do you have digital rearview mirror?
Do you see one, or two cameras in the 3rd brake light assembly above the rear window?
That'll help with you you have it didn't have already.
Recently bought the igloo branded plug in cooler freezer fridge. Same parent as dometic, but a fraction of the cost. Very sturdy and worked perfectly for our trips so far. Gets to temp quickly and holds it well. Can run in 12v or 120v, no built in battery though. When we are ready to travel...
I know they say to fold them but I never do. Never did in my last Toyota either. Never had an issue, brushesmoed right past them and helpedcen the mirror glass as well (when it wasn't a touch less anyway).
Happy that I don't have to unscrew the antenna mast though as I had to do in the prior...
Just trying to confirm your setup:
1. HUD on "standard"
2. Carplay
3. Google maps (version?)
HUD on"full"supposed to be the navigation + DRCC. That's what I have mine set to. I get the DRCC, but no navigation (I'm AA though)
zero issues with my OEM bed mat sliding around. actually takes a good bit of effort to shift it or drag it out when I don't want it. Must be the difference between the raw composite bed and the factory spray-in liner. Spray-in only when I want things to move around more easily. OEM mat when...
I put a plastic cap over each stud once I had disconnected so that they couldn't even accidentally come in contact. Just a generic pipe thread end it furniture leg bottom style cap.
For me, it's as if the first long road trip or passing 2K miles suddenly shook the engine out of slumber (17mpg tanks were loaded and towing or significant idling).
Date
Fuel
PPG
Price
Octane
Units
Miles
MPG
Result
CumMiles
11/29/2024
Exxon
$2.97
$50.50
87
17.009
337.9
19.87
OK
337.9...