Search results

Can you share some images of where the topper meets the cabin? My hesitation to purchase is the gap due to the spoiler.

Stolen Vehicle Locator https://www.toyota.com/connected-services/connected-services-plans/

Mine just expired today... Although it was laggy, I did enjoy being to remote start from anywhere. Since the 3-press remote start on the remote is terrible in function and range, I often defaulted to the app to remote start. It was also nice being able to lock/unlock remotely if I wasn't near...

Based on this video by TRD JON, looks like his 4runner is a TRD ORP with the stock red bilsteins.

2025 4runner top hats are steel. I wonder when/if they'll phase those into the tacos.

If you don't need the locker then go limited.

Mine did this around 450 miles. I pulled the battery terminal and it reset. Never came back and no other issues at 12k miles.

Hi All, Installed some front lower link skids from RCI on my taco. Overall pretty easy but here are some tips that may help the install: Loosen the purple 19mm link bolt from the bolt side. The nut side has features on the nut face that prevent it from turning. Once loosened, you can then...

In case anyone was wondering, I looked at Stillen's previous videos and the baseline (& thereby, likely, the after results) appears to be at 91 octane. I didn't hear that mentioned in the most recent video (or missed it).

We live in the trees & have this problem every spring; you can try folding in your mirrors and/or putting a towel in the areas that your bird likes. However, for us, it's usually 1 specific bird and we either need offer it an alternative spot to perch adjacent to the truck (usually they will...

More info: https://www.tacoma4g.com/forum/threads/factory-lift-kits-oem.9051/#post-135205

Update: I have a leak on the front driver-side. I’ll remove it clean up the area and threads and then try again with the sealant. I’ll admit I tightened down the screws a few hours later once I noticed the rack had shifted so I probably broke the gasket seal in the threads by doing so.

UPDATE: The shop forgot to plug in the connector behind the switch/in the dash. I didn't check it because I didn't think they would disconnect it to replace the headlight but apparently it is part of the repair procedure. All fixed!

Based on this yt video it does look like it should be illuminated. Checked the headlamp and it is OEM and everything looks plugged in. Mystery continues... Headlights, DRL's and blinkers all work. It's just the adjustment dial that isn't illuminating or functioning.

Hi all, Few questions: 1. Does your manual adjustment dial for your headlights light up? 2. Does anyone know which fuse powers the switch and/or mechanism by which the headlights adjust? My truck was in an accident which resulted in a headlight replacement and now the dial doesn’t do...

Finally got my truck back and the rack on. Overall it went on easy. I had to pull the stickers that sealed off the holes in the roof. Prior to installing the rack I filled all the holes with some grey RTV. I made sure all the gaskets were sitting correctly and the rubber on the rail as well. I'm...

Finally got the truck back last weekend. CBI Sliders with a kick. Install went as planned. No additional modifications needed to get them on. One bolt was a little tight but I gave it a good pull and it went in place. Quality looks really good and they're very sturdy. Big enough to use as a step...

Can you share any pictures of the axle/grease/etc.?

Here are pics of a lasfit clone/amazon one: https://www.tacoma4g.com/forum/threads/amazon-nqoqn-brand-6ft-bed-mat.7126/ Fits great! And yes, you‘d have to cut out the holes for the hooks. $88 shipped.

I use the regular key because the digital one hasnt been reliable enough to work every time. However, it is cool that you can share digital keys in case someone (for whatever reason) needs to access your vehicle if you're not present.