Search results

So you have some options. Kinda depending on what are you planning to power with those USBs? One easy option is to take something like this (https://a.co/d/1lVJWFE) and run it behind the stereo and down to the USB C port in front of the shifter (or just to that one on the side of the head unit)...

Fumoto works so great. I keep a hose attached to mine and just pull it down into my drain pan when I need to drain the oil. Works awesome.

Engineering is all systems go on this front right now, should be out really soon.

Let me know if I can answer any questions and I may have a coupon code for you on the victory rack if you go that route, PM me ?

We actually had a launch, but pulled it before we sold any because in my testing on a long road trip, I wasn't happy with the radar relocation. Real close to dropping the new version with the radar in the stock location.

The hood scoop or the flares? The flares are just clips with no adhesive.

We painted them here at the shop. Used automotive urethane paint with flattening agent. If you don't want to get that involved, you could try plastidip.

If I remember correctly I used this mount and it fit without the oring on the bottom of the nut. You could probably find a 1/2 NMO for thicker steel, but I wanted to keep it all low profile. Don't forget you'll need to remove some powdercoat underneath the brackets for it to ground...

Yep, incoming.

PM'ing you a coupon code :)

No rush, it's been cold and snowy here in Michigan too, hard to get anything done outside.

I can check with tech support, but I assume either a non-stainless bolt snuck in or sometimes people drill through the mounting holes (using them as a guide) and the powder coat gets knocked off in that hole by the bit. It could also be we missed a spot of powder in that location, but it would...

You don't technically have to remove the whole rail, but you'll need to loosen the bolts and slide our MOLLE panel brackets underneath.

Under the passenger seat. Then I put a small remote speaker behind the dash. It works great.

Glad they worked out. I pulled the radio to run wires. It was pretty easy.

I'm sorry to hear that. The hardware should all be black oxide coated stainless. Could you please shoot the customer service team some photos when you get a second just to verify that our bolt supplier didn't mix anything up? Sorry for the hassle. [email protected]

The bolt to some "z" mounts and those bolt to holes drilled in the bed.

Thanks! I was in a chat the team last night and they are hunting down what could have happened.

Thanks, apologize for the hassle. One of our engineers is on it.

Hey guys, let me relay this information back to my engineering team so we can see what's going on. Have either of you reached out to our tech support team? Just in case they are already relaying this information.