Search results

I am not absolutely sure where I bought the part, but I think I bought it via Amazon. depending on the other fittings you use, here's a possible low profile fit: https://a.co/d/3EASKOy

Ha! Yep... it still moves. I just finished a Continental Divide expedition that started at the Canadian border in Montana and ended at the Mexican border in New Mexico. We crossed 12 mountain passes and traveled just shy of 6,400 miles... it still moves ;)

With expedition loadout on a 2024 longbed Trailhunter

Copy. Thank you.

How many hours were involved in the installation. Will you share the amount that you paid?

Is that only the face plate or the radio body too.

I decided to mount my ham radio body on the passenger side of the center console. I used a threaded "cheese board" backer/mounting plate to attach the radio bracket. The location will allow a short run to power at the fuse panel under the glove box, a relatively short run to the radio's face...

I have installed a cap on my Trailhunter's 6' bed. So, I removed the compressor access cover. I needed to do some minor grinding to remove some of the Decked underside ribbing... this allowed enough room for a 45 degree fitting on the airhose. I leave the hose connected under the deck.

I am interested in this product if it can be "grabbed" while entering the vehicle. If the windshield side of the handle is smooth/not indented to provide sufficient purchase while entering, I am not interested. I'm thinking that the price should be <$100.

Did you install the bumper or did you hire an installer? I am wondering about the time required to install this particular bumper.

It's getting there... a couple more pieces and I'll feel pretty good a out getting into the wild. The Smartcap has, so far, been a fairly good platform. There are always challenges in getting different manufacturer's gear to fit well together... this build has been no exception. The cap has not...

I put a set of BFG KO3 275/70/18 on my Trailhunter. That tire comes in load range E... load range C is not available in that specific tire. There's a rumor floating around that BFG is going to produce a load range C variant in that specific tire. I am running mine at 36 PSI cold. I need the...

I have a EVOa Smartcap (EA 1313-MB) on my 2024 Trailhunter 6' bed. The first cap had some issues and was replaced by RSI and installed yesterday by a local dealer. Overall quality is good and the appearance is quite nice. However, the rear gull wing door has a fairly significant conflict with...

I raised this issue with my local dealership. The issue seems to be directly related to the "handshake" or interface between Android Auto and the truck. Volume is significantly different when using audio aspects of mapping or music apps without Android Auto. Once Andoid Auto is brought into the...

I use a set of bed stiffeners. I have a Decked drawer system, RSI cap with a rack, an awning, and a RTT.

I needed to do a bit of minor shaping/grinding to make sufficient room for the air hose and fittings. I used a Dremel tool for this. Making the turn from the oem attachment fitting on the compressor was tight with the Decked platform in place. I have a cap on my rig, so I have the option of...

The type of rooftop tent that I want to put on my 2024 Trailhunter will cover the sharkfin gps antenna, thus eliminating my gps-based capabilites. I don't understsnd why Toyota chose to locate the antenna as they did... it interferes with several outfitting options. So, I need to find a way to...

Try this link: https://www.amazon.com/gp/aw/d/B07W4NX2DP?psc=1&ref=ppx_pop_mob_b_asin_title

For one application, I used an L-track fastener. It simply slides in at the end of the crossbar.

I have my Kickass LiFePO4 battery box connected to the AC outlet in the bed of my Trailhunter. It is connected via a smart charger and works very well when I engage the AC switch on the dash. I also have my fridge/freezer connected to the outlet and the battery box.