Another thing to note - you will need to have a different camera mount. Here's the thread describing that if you have the ability to print yourself:
https://www.tacoma4g.com/forum/threads/heretic-20-led-light-bar-install-on-trd-pro-grill.5815/#post-81404
Here's the same designer who has them...
One more note - if I recall correctly, I did have to extend the wire length of the DV8 wiring harness in order to get it across the front of the truck. This is what I used:
https://a.co/d/cYa8sXX
Yes - since the "Premium" package came with the AUX wiring already installed - it's all wrapped into one pigtail. The main connection is located on a wire that's basically underneath the filler for the washer fluid. Your truck should have come with several different pigtails that plug into...
I don't know of any specific plug that's designed to fit that area, but it would likely be easy enough to fabricate something out of an ABS panel usually available at big-box stores...
I don’t think you’ll be able to do a “full oem” because the camera and wiring harness for the lights aren’t on your trd off road. I have the same. The oem light is made by rigid and ties into the headlights so that you can only turn on the light bar when you’re under a certain speed and using...
I live in Austin in a fairly hilly area. With my 24 TRD OR in a fully stock configuration - I was getting ~17MPG with mostly city driving. Also, living in Texas, I will say that my highway MPG's are not much different, but that's likely because I'm doing 75-80 at a minimum.
I did change to...
I use a 6-foot cable lock if I have to lock. I bought the type that has a smaller head that inserts into the lock body. This allows me to run it through the D-ring on the truck bed and then through the bike frames. Hopefully just enough to slow down a thief and get him to move on.
The one...
Up for sale is a set of TRD Off Road wheels and tires with the stock TPMS sensors still installed. These were driven for 5714 miles, and they were rotated at the 5000 mile service. No issues, no plugs, fully stock balanced and smooth. Austin, TX area.
They're an M5 body bolt common to a lot of cars. You could possibly get away with an #10, but an M5 is the proper choice. I used these on my own install, because I had them leftover from my BMW repairs:
https://www.amazon.com/dp/B09WKFDVGV
Finally got my Heritage Grill in and installed. I chose to go a different route than I've seen before on the lightbar. I chose the DV8 Elite Halo bar. It was on sale during memorial day for $180, so I jumped on it. I personally think the halo looks cool (raptor-like without being a...
Thank you so much for this! I printed and installed it this weekend on a Trailhunter grill swap, and it worked perfect after I got my print settings right ;).
I've pulled a 4000lb utility trailers (9ft tall aerodynamic brick), and I got about 12mpg on the highway doing 75. Sadly, I don't do a lot better than that while not pulling a trailer (16-17). It can be ridiculously windy here in Texas. I've got 285/70/17's on it for reference.
I'm not sure which size wheels you're looking for, but assuming 17", Discount Tire is showing the Method MR301's in stock. Also, Icon has the Hulse, Anza, and Nuevo in stock.
I just ordered my grill from Serra in Decatur, AL as well. $203 for the grill shipped to my door is just too good to pass up. I'll be going with a different light than what I've seen posted so far, so I'll post back again when I get that installed.
Overlaying a license plate onto this image, and using the existing parking sensor and grill grids as a reference point - I would project the license plate to look like this. Sadly, it will block the inside LED's of the lights. This is a miss on RCI's part, IMO. I wonder if they could just...
I will not ever speak highly of GST. I basically got screwed when I bought my first Taco in 2001 because of their shenanigans, and it turned me off from buying a Toyota for 23 years. Now I'm older, wiser, fatter, balder, and slightly more well-off. I wanted a truck with all the features this...