Cobb Accessport / CAMTuning Review (2025 Limited Hybrid)

[stanleyhudson]

Recently purchased the Cobb Accessport and paired it with the CAMTuning ECU Flash and the results have been excellent. The improvement from stock to Cobb OTS to the CAMTuning flash is definitely noticeable. The truck is running smooth, and the increase in power and torque is immediately apparent especially during my "heavy-footed" moments. The biggest difference has to be transmission shift points when driving between 25 to 40 mph, the throttle response feels sharper. Installation and flashing were straightforward, and everything has been performing flawlessly so far.

Huge shout out to @CAMTuning for the assistance throughout the entire process from initial installation and troubleshooting to the flashing process.

I would recommend the Cobb Accessport to anyone looking to get a little more performance out of there truck with the OTS tune and the CAMTuning flash for anyone looking to take it to the next level.

plus - designed and printed my own mount for the Accessport, this is the only way I could mount it at eye level.

Sponsored

 

[evlfred]

What did you print it in? ASA? ABS?

Recently purchased the Cobb Accessport and paired it with the CAMTuning ECU Flash and the results have been excellent. The improvement from stock to Cobb OTS to the CAMTuning flash is definitely noticeable. The truck is running smooth, and the increase in power and torque is immediately apparent especially during my "heavy-footed" moments. The biggest difference has to be transmission shift points when driving between 25 to 40 mph, the throttle response feels sharper. Installation and flashing were straightforward, and everything has been performing flawlessly so far.

Huge shout out to @CAMTuning for the assistance throughout the entire process from initial installation and troubleshooting to the flashing process.

I would recommend the Cobb Accessport to anyone looking to get a little more performance out of there truck with the OTS tune and the CAMTuning flash for anyone looking to take it to the next level.

plus - designed and printed my own mount for the Accessport, this is the only way I could mount it at eye level.

 

[stanleyhudson]

What did you print it in? ASA? ABS?

I've been testing all the previous versions in PLA, ordered some ABS and PETG today to figure out which is best for the final version.

 

[evlfred]

I've been testing all the previous versions in PLA, ordered some ABS and PETG today to figure out which is best for the final version.

ASA will hold up the best in UV and high temp

 

[stanleyhudson]

ASA will hold up the best in UV and high temp

I’ll definitely have to look into that then. I’ve never used ASA and honestly your post was the first time I’ve ever heard of it.

Time to take a YouTube learning adventure.

 

[Pappy]

I'm lucky. Cam works in my town and I was able to get one-on-one with him tuning my truck. My truck is a different beast. Lots of smiles per mile.

 

[STrooper]

Cool bracket! Could you make me one if I zelle you the$?

Sponsored