Greenlane top hat spacer leveling kit

[Masonhall16]

Does anyone have any experience with the Greenlane 3/4 top hat leveling kit? I have been trying to find something that will level the truck out just a bit without affecting the spring rate, and this is one of the options I've come across. I have seen many people running their sliders, but havent found much info on the leveling kit.

Sponsored

 

[Yotota]

It's a 3/8" thick aluminum plate. As long as the holes are in the right spots, it'll work.

And in my opinion: 3/8" is the perfect thickness for a top spacer on these trucks. That's the maximum amount that still allows for full thread engagement of the stud nuts, and keeps a very small amount of rake to the stance.

 

[Old Trucker]

It's a 3/8" thick aluminum plate. As long as the holes are in the right spots, it'll work.

And in my opinion: 3/8" is the perfect thickness for a top spacer on these trucks. That's the maximum amount that still allows for full thread engagement of the stud nuts, and keeps a very small amount of rake to the stance.

Will these 3/8" thick plates also reinforce thetop hat?

 

[Yotota]

Will these 3/8" thick plates also reinforce thetop hat?

Negative.

You would need this product to be a 3/8" lift spacer AND a strut bushing reinforcement:

(I have a set sitting in my shop that I'll probably install this coming week)

https://thetacogarage.com/collectio...er-with-1-lift-for-4th-gen-toyota-tacoma-2024

Sponsored