Search results

I just pulled these off my 2025 and installed the heaver 821V springs. The 819V springs compensated for the extra weight of my camper and rear bumper, but I didn't get any lift. These are springs only, no shocks. There are compression scuffs where the coils contacted each other. The springs have...

See page 89 of the owner's manual. If you fill the tank with the gauge near Full it will not display correctly. My experience is when my distance to empty says zero I have 2.6 gallons left in the tank. The fuel range on the display takes into account your driving. With my camper I only get...

I installed the grab handle mount from Bullet Point for my Garmin tablet. They also have a mic holder. https://www.bulletpointmountingsolutions.com/collections/2024-toyota-tacoma/products/2024-toyota-tacoma-passenger-side-grab-handle-mount-with-20mm-ball...

Pulled the Dobinson C59-819V springs off the rear, and installed C59-821V. Dobinson recommended the 819V, but with the weight I have on the back I didn't get any lift. If anything, I might have been negative. I'm still waiting on something for the fronts. The Dobinsons were on backorder for 2...

I called my favorite OME/ARB dealer last week about springs. They told me nothing has been released yet for sale.

I installed a canopy/camper. I can tell you without any hesitation that the dust in the back was horrific. It wasn't leaking in from the canopy. It was coming in past the tailgate. I did find a company online that sold a tailgate seal kit. It works OK, and I did need to seal a few places it...

I have two auxiliary batteries in my Tacoma. One is located in the Goosegear rear-seat delete. The second is in my canopy camper. The backseat battery is a 50Ah Li off Amazon. It's charged off a pair of 2A/4A/8A DC-DC chargers. One charger is relayed off the engine and only charges when I'm...

Spent the week in southern Utah. I've been prepping the truck for an adventure this summer. This was shakedown #2. Truck needs lift. I have Dobinsons in the rear, but all they did was compensate for the weight with no elevation. New springs this week.

Don't want spacers.

The only thing I'm going to add is to start with your bumper selection. I found out the hard way that a Warn 9.5xp doesn't fit in the cradle of a C4 Fabrication Lo-Pro bumper.

That might work. Ordered.

Thanks. I see that kit includes the rears. I'm good there. I only need something for the front.

Thanks Ken. I'll look into them. I did find that Icon has struts/springs available outside of the full kits.

I've been waiting on front springs from Dobinson for 2 months. They are still backordered and they are telling me 3-4 more months. That won't work for me. I need 1.5"-2" of lift with 160#. I don't want spacers, I want springs to compensate for the weight. What other options are out there? I...

It's just a bubba bolt through the lower hole .

That bumper looks like mine. Victory4x4.

Good luck. I've been searching for a solution for 3 months. There is one company that claims they have a solution, but it's not available yet with no ETA. I have the same issue as you. That company is https://www.ggoffroad.com/ I did acquire from Toyota a tailgate harness and second camera. I...

I have the C59-821V in the garage ready for install. I just need to coordinate with a buddy to use his flat driveway.

Figured I should contribute my experience with Dobinson Springs. I have a 2025 TRD-OR that I'm building for a long trip to Alaska/Canada this summer. This included a bunch of stuff that added lots of weight. I called Dobinson and had a chat with one of their people. My estimated rear weight was...

I'm also running load range C tires on both the 4R and the Tacoma. I carry lots of weight.