2025 Wind Chill Pearl Limited Chrome Delete build

[gr8outdoors62]

Tailgate Handle
Cmillls45....it sounds like you accessed the tailgate handle from the "inside" of the tailgate. Did you replace the entire tailgate handle assembly? I have p/n 76839-AK02 on order which I expect will be just the chrome portion that the camera and light attach to. I suspect that is why Eesh29 was able to pop the old piece off from outside the tailgate without removing the entire tailgate handle assembly. Could you confirm my assumption? When I get my new part, I may be able to see more clearly how it attaches to the existing handle assembly (which is already black).

Bumper Extension/Sensors
Eesh29...thank you for the heads up on the sensor calibration $$. I was going to see if I could reuse the existing sensors like Cmillls45...hoping that prevents the need for calibration. I am guessing that the new sensors triggered the system to realized a sensor had been replaced. Hoping that if I use the existing sensors the system stays "happy". And thanks for the heads up on the 89348-04010-C1 adhesive mounts.

I appreciate the info!

Sponsored

 

[cmillls45]

Tailgate Handle
Cmillls45....it sounds like you accessed the tailgate handle from the "inside" of the tailgate. Did you replace the entire tailgate handle assembly? I have p/n 76839-AK02 on order which I expect will be just the chrome portion that the camera and light attach to. I suspect that is why Eesh29 was able to pop the old piece off from outside the tailgate without removing the entire tailgate handle assembly. Could you confirm my assumption? When I get my new part, I may be able to see more clearly how it attaches to the existing handle assembly (which is already black).

Bumper Extension/Sensors
Eesh29...thank you for the heads up on the sensor calibration $$. I was going to see if I could reuse the existing sensors like Cmillls45...hoping that prevents the need for calibration. I am guessing that the new sensors triggered the system to realized a sensor had been replaced. Hoping that if I use the existing sensors the system stays "happy". And thanks for the heads up on the 89348-04010-C1 adhesive mounts.

I appreciate the info!

You’re correct. And that’s the same part I ordered. Here’s a list that I kept of parts which I ordered:

What Part #
Door handles: Rave
OEM Tri fold tonneau: PT954-35240
Pro grill: Aspire
Pro grill camera relocation bracket: Aspire
Pro wheels: PTR56-35242-F1
Wheel center caps: PT998-34221-2F
Lug nuts: PT076-0C200-02
Sensor mounts for lower front bumper: 89348-04010-C1 (need 2x)
Side Mirror Cap: 87945-AK030-C0, 87915-AK030-C0
Skid plate: PTR60-35240
Splash guards: PK389-35R50-P1
Tailgate handle: 76839-AK020

 

[gr8outdoors62]

Cmillls45....very nice...thx. How do you like the RAVE handle covers? I could not convince myself to open up each of the door panel just yet....I have color matched handle covers on the way from RAVE. Hope they fit well...they were a bit pricey for what they are.

 

[cmillls45]

No complaints on the rave overlays. Since I have a black taco, I got the black ones and saved a few hundred. You can’t see any chrome, they’ve been on a month and look and feel great. They look OEM.

 

[gr8outdoors62]

Happy to hear that...thank you for your help! I should have my tires on new wheels this weekend and will start deleting the chrome bits shortly after.

Sponsored