Bed divider with tonneau cover and bed mat? All OEM

[Zigity]

Wondering if anyone can confirm the OEM bed divider will fit with the lowered bed rails from the OEM tri fold tonneau cover and the added height of an OEM bed mat. I’ve seen a post that a 3rd gen bed divider works with slight modification (although they didn’t have a bed mat, there appeared to be enough clearance). Interested to know about the 4th gen. I like the bed divider, but also wonder about the fold in/out bed extender

Sponsored

 

[sjfuqua]

Wondering if anyone can confirm the OEM bed divider will fit with the lowered bed rails from the OEM tri fold tonneau cover and the added height of an OEM bed mat. I’ve seen a post that a 3rd gen bed divider works with slight modification (although they didn’t have a bed mat, there appeared to be enough clearance). Interested to know about the 4th gen. I like the bed divider, but also wonder about the fold in/out bed extender

Yes. I have all three and works fine with some minor mods required of the divider. Please see my post (#280) on the thread below:

https://www.tacoma4g.com/forum/thre...alled-on-2024-tacoma.4312/page-19#post-113879

Cheers.

 

[Zigity]

Yes. I have all three and works fine with some minor mods required of the divider. Please see my post (#280) on the thread below:

https://www.tacoma4g.com/forum/thre...alled-on-2024-tacoma.4312/page-19#post-113879

Cheers.

Incredible, thank you! Beautiful truck, by the way. This looks like a 4th gen bed divider, and not a 3rd, which is what I am wanting to do. Oddly enough, modifications to fit seem the same.

One additional question for you: how much front to back movement does it allow on the rails? Can you adjust placement along the entire length of the rails, or are you limited to the middle of the bed?

 

[sjfuqua]

Incredible, thank you! Beautiful truck, by the way. This looks like a 4th gen bed divider, and not a 3rd, which is what I am wanting to do. Oddly enough, modifications to fit seem the same.

One additional question for you: how much front to back movement does it allow on the rails? Can you adjust placement along the entire length of the rails, or are you limited to the middle of the bed?

The divider is able to be positioned anywhere along the length of the rails front to back. However, towards the front of the bed rail the cover has a support bracket that does interfere with the placement of the divider. So several inches in the middle of the bed are challenged. In the attached photo the cab is to the right and you can see the support bracket to the right of the bed light. Even as you approach the bracket the rod itself interferes when clipped into its stowage bracket.
Hope that helps.

Sponsored