Sponsored

Singha

Trailhunter
Member
First Name
Siri
Joined
Aug 28, 2025
Threads
1
Messages
7
Reaction score
13
Location
NY
Vehicle(s)
25 Taco TrailHunter, 07 FjC, 00 100series, 04 Lx470 (100series), 88 Samurai TT
Wanted to share the combo that I finally figure out to work. I didn't see any info on this combo.
I wanted a cover to deter any prying hands from the bed, And still run a rack for my RTT and bike racks on the rails when the tent is not on the rack.
The combo is the following-
Rough Country hardroll With a TRUKD T Series 12.5" Bed Rack

The RC hardroll is mint...It does take some time to align and alot of adjustment to get perfect. Haven't had any issues.
Every few weeks I follow up with making any adjust again and go around tightening everything up.
I just picked up this mid rise bed rack for my rooftop tent. I wanted a mid rise as I didn't want the tent to hang too much over the front cab.
If I do need more height I will get replacement side rails to bring the height up.

I have enclosed a pic of the hardroll clearance at both the front and rear rail points.

Enjoy.

2024 Tacoma Rough Country hard roll up bed cover WITH TRUKD T Series 12.5" Bed Rack Closed rear angl


2024 Tacoma Rough Country hard roll up bed cover WITH TRUKD T Series 12.5" Bed Rack Straight Rear open cover


2024 Tacoma Rough Country hard roll up bed cover WITH TRUKD T Series 12.5" Bed Rack First Rail Clearanc


2024 Tacoma Rough Country hard roll up bed cover WITH TRUKD T Series 12.5" Bed Rack 2nd rail clearanc
Sponsored

 

theDLR

TRD Sport
Well-known member
First Name
AL
Joined
Jul 24, 2025
Threads
0
Messages
45
Reaction score
42
Location
Nevada
Vehicle(s)
2025 TRD Sport
is that how the rack bar legs hangin over the outer edge of the bed? I like the look of it, just that overhang kinda then kills it for me.
 

Wighty

TRD Pro
Well-known member
First Name
Rob
Joined
Apr 30, 2024
Threads
3
Messages
110
Reaction score
118
Location
OC, CA
Vehicle(s)
2024 TRD Pro
Can the height of the rack be extended so it's level with the roof? I'm wondering if will work with my longboard.
 

TRUKD Bed Racks

SR5
Active member
BASIC Sponsor
First Name
Jake
Joined
Nov 6, 2024
Threads
5
Messages
44
Reaction score
35
Location
Pittsburgh, PA
Vehicle(s)
Tacomas!
Wanted to share the combo that I finally figure out to work. I didn't see any info on this combo.
I wanted a cover to deter any prying hands from the bed, And still run a rack for my RTT and bike racks on the rails when the tent is not on the rack.
The combo is the following-
Rough Country hardroll With a TRUKD T Series 12.5" Bed Rack

The RC hardroll is mint...It does take some time to align and alot of adjustment to get perfect. Haven't had any issues.
Every few weeks I follow up with making any adjust again and go around tightening everything up.
I just picked up this mid rise bed rack for my rooftop tent. I wanted a mid rise as I didn't want the tent to hang too much over the front cab.
If I do need more height I will get replacement side rails to bring the height up.

I have enclosed a pic of the hardroll clearance at both the front and rear rail points.

Enjoy.

Closed rear angle.webp


Straight Rear open cover.webp


First Rail Clearance.webp


2nd rail clearance.webp
Thanks for sharing! That's a great setup.
 

TRUKD Bed Racks

SR5
Active member
BASIC Sponsor
First Name
Jake
Joined
Nov 6, 2024
Threads
5
Messages
44
Reaction score
35
Location
Pittsburgh, PA
Vehicle(s)
Tacomas!
Can the height of the rack be extended so it's level with the roof? I'm wondering if will work with my longboard.
Hey, Joe here from TRUKD. Our taller 24.5" T Series rack will extend above the cab and be great for carrying a longboard. Shoot me an email with any other questions. - [email protected]
Sponsored

 
 






Top