SR5 Fog Light Conversion

[Christucon]

I have a 2024 SR5 which came from factory without fog lights. I bought the ss6 diode dynamics fog lights and I'm planning to install them myself. I was wondering if there is some bracket extra for the fog lights to purchase so that when I take the grille front panel off I'm not surprised with the fact that I'm missing a mounting bracket.

Sponsored

 

[maxx075]

I have a 2024 SR5 which came from factory without fog lights. I bought the ss6 diode dynamics fog lights and I'm planning to install them myself. I was wondering if there is some bracket extra for the fog lights to purchase so that when I take the grille front panel off I'm not surprised with the fact that I'm missing a mounting bracket.

The fog lights mount into the bumper with two Philips screws IIRC

 

[Christucon]

Thanks!

 

[Baltimore]

If you bought the 24-25 Tacoma kit from Diode Dynamics, it'll contain the mounting brackets to line up to the screw holes within the bumper structure.

You'll then want upper bumper part #010 to have the fog light cutouts but not the parking sensor holes. Part #050 is both fogs & sensor cutouts.

Have it all ready as you have to remove the full face and then disassemble the upper bumper portion to get at the fog mounts.

 

[Strumzy]

If you bought the 24-25 Tacoma kit from Diode Dynamics, it'll contain the mounting brackets to line up to the screw holes within the bumper structure.

You'll then want upper bumper part #010 to have the fog light cutouts but not the parking sensor holes. Part #050 is both fogs & sensor cutouts.

Have it all ready as you have to remove the full face and then disassemble the upper bumper portion to get at the fog mounts.

sorry to hi jack the post but...
When you say part #10, where from? Diode Dynamics?
sorry I'm new here and have the same truck and would like to install these fog lights as well

 

[Baltimore]

sorry to hi jack the post but...
When you say part #10, where from? Diode Dynamics?
sorry I'm new here and have the same truck and would like to install these fog lights as well

Sorry, Toyota part number for the upper bumper.

Extension, Front Bumper, Upper [Fog light grille, NO sensors, matte black] 53931-AK010

Extension, Front Bumper, Upper [Fog light grille, with sensors, matte black] 53931-AK050

Extension, Front Bumper, Upper [Fog light grille, with sensors, Limited chrome] 53931-
AK030

 

[Strumzy]

Thank you!! Been trying to get this figured out for months!

 

[Strumzy]

This is the part needed.

Sponsored