Search results

For those with custom challenges there is a TSB for your AC unit (I think it was) to be reprogrammed to fix it. That said, anyone else notice that custom is the only mode that doesn't "stick" between power off cycles (meaning the next time you start the truck, it details to normal)? For me...

I find the LTD seats very comfortable and we have both been able to adjust to our liking. ... Just wish there was a memory feature for when the dealership or mechanic feel the uncanny need to slide the seat all the way back and lean it way back... Would be nice to hit a bottom to put it back...

If you use the rave bracket, you will need to access the diagnostic menu afterwards and perform a positive angle adjustment to your front camera. It'll most likely be in the range of +162 to +165 and you'll want to do so in an area that has a ton of lines you can track against (like a painted...

Each of the front grilles uses a slightly different mounting bracket for the front camera. The parts diagrams are not consistent with how they name/reference between the grilles and the mounts. Further, the parts diagram only cites the assembly of mount+camera unit. The next time you happen...

then that matches. because making the adjustment was a non-issue. But when you attempt to tell the entire system to "resync" / recalibrate itself... that's when it blows up on you. They were even on the phone with Toyota corporate, but couldn't even get from them what the "tolerance limits"...

Can you clarify whether you just did the diagnostic adjustment of the front camera and called it done? or did you adjust the front camera and then properly run the entire 360 degree camera system calibration to get all the viewpoints matching and understood? Trying to make sure I understand...

Using the Rave bracket, toyota service techs had to put the camera at +162 to get the lines perfectly lined up. However, if you attempt a system calibration at this point, it will fail and disable all of your 360 degree cameras and forward/reverse guidelines. When bringing this to Rave's...

Side note: Rave's camera bracket is actually outside of system tolerance for Toyota. While it can be adjusted to +162 to get visual alignment, if one has to run a recalibration, it will fail and disable all your 360 degree cameras and steering lines. (Yes, I know others have said +165, but +162...

No. Well.. you could. You need upper bumper variant #5 (53931-AK050) if you want black with fog with sensor. You will also need two sensor mounts that stick to the backside. The black ringed ones are part number 89348-04010-C. The sensor clips are 3M tape, not reusable. I made the error the...

And the arb rears use 23mm at 125 ftlb! Screw trying to be consistent!

The price is for a pair, reusing transport bolts for attachment. Pretty damn inexpensive, even before online discounts, for what you're expecting it to hold up to.

53931-AK010 = matte black, fog lights, no parking sensors 53931-AK020 = matte black, no fog lights, no parking sensor cutouts 53931-AK030 = chrome Limited trim, fogs, parking sensor cutouts 53931-AK040 = TRD Pro only, restricted purchasing in place (glossy black w/fog w/sensor cutouts)...

Yes. Once you update the VIN you can access your digital window sticker

For those that might be interested, I took these measurements when doing my brainstorming: Grille Opening: 20-3/16" wide x 1-3/16" tall Grille rear, inside "track": 20-5/8" wide x 1-7/8" tall (flat area behind cutout) Grille rear, max void: 21-5/8" wide x 2-1/8" tall (angles or taller...

The part number I listed at the end is the fronts. They are cherry red and stamped "Toyota" on the exposed face.

OEM red front tow/recovery plates. It's a pair. Reuses existing factory transport bolts. `MSRP $160, can be had for around $120 at the right online shops. Part# PT974-35250

They should have left them with you in the truck, as that is still your vehicle property to have the plugs. The Limited chrome upper bumper is part: 53931-AK030 The Limited front license holder is part: 75101-AK020 The Chrome upper bumper plugs for the license plate positions are: LH...

"The Jetsons" car sounds (any BEV/HEV)= pedestrian speaker. Other sounds = other causes :-)

Someone needs to post pictures of there. Everything in the website is "representative". I hope they didn't ignore the sill wings Lasfit and TripleA have.

Didn't work for me, but I wonder if anyone else caught that displays "error" for the smallest moment when trying to deselect