Search results

Best of the holidays to all and merry Christmas!

It's easier to see the firewall entry points from the engine side. There is one on each side of the truck. Each one has two nubs, one on the bottom and one on top. You can clip one or the other and then feed cables through the hole. I've only fished wire through on the passenger side and it...

Right. The connector I showed in the picture is likely the USB C on the right side of the screen. I was referring to being able to power the USB adapters that Victory includes in the kit. You wouldn't be able to power your radio with that. Since you're bringing the antenna in through the...

I'll certainly do a post with plenty of pictures. It's probably going to be a couple of months though. That's the downside w/the CBI products, the lead time. I ordered the last week of Nov and they quoted 10 weeks out for shipment, so I'm guessing I'll get it early to mid-Feb. If I had it...

It looks like it MAY fit but the plastic from my 8" display is definitely different from the plastic you show the 14" display having. This is a screenshot from your instructions. Here is a picture of my plastic. ...and what it looks like w/o the plastic. So, it appears to me the bolts are...

What Powhunter said. I'd be happy to test it for you! ;o)

Will this with with the 8"screen as well?

Nice recap!

I'd be leery about going with the 821's unless you're going to raise the front as well. For sure call Dobinsons but they seem to always lean toward the bigger spring. I'm not certain they're not still going off the measurements of the LC 200/300, which is a heavier vehicle to start with. I...

Here's my thread on the topic. Lots of good info. Post 52 is a good recap of the different Dobinsons options. There's also this thread where he installs Old Man Emu springs. If you're just carrying weight or towing on a sporadic basis then something like air bags might make sense but if the...

You can 3D print your own bracket if you have a printer (there's a file to download in one of these threads somewhere) or you can buy one from a company like Rave. They sell the parts here... Their install video is very well done as well. They talk about the camera starting around the 9:20 mark.

Thanks! That makes me feel better. I pulled down their instructions and you're right, looks like plenty of room. Can you reach the freespool lever or are you stuck using the motor to let line out?

I don't have this exact unit but based on the ones I bought I can safely say there is no adjustability unless as Suzay says you just don't connect the main red power line but I can't say for certain they'd even function at all with just the turn signal power connected. So, I can't say...

I'm sure it has to be something along those lines but it's odd that the whole system fires up. In any event you could always install a physical switch for the lights but I realize that's a hassle and takes away the whole reason for wiring to the ignition circuit to start with...

Looks good. What winch are you running and more importantly (to me) how much clearance did you have on either side? I bought a Harbor Freight winch on sale to go with the CBI Super Stock Covert bumper but won't have the bumper for another month or so. The HF winch is 2 inches wider (23" vs...

Yes, thanks. I saw that in a couple of different threads and tried to find a different fuse to tap but couldn't come up with anything. It would have been ideal to find a switched fuse in the passenger side fuse box but it seems like that whole box is constantly powered. Realistically though...

What you see is all I did. It's not difficult though. The hardest part is usually deciding how to run the wiring to make it look decent and I know I'm not the best at that. The new solid state power distribution modules are pretty sweet though. They're cheap and easy to set up. Just run the...

Here's my thread on the topic. Lots of good info. Post 52 is a good recap of the different Dobinsons options. There's also this thread where he installs Old Man Emu springs.

I installed multiple things at the same time so figured I'd just create a single post for it all. I purchased this "heritage grill" that came with raptor lights and light bar. When I bought it, it was $215, which I thought was an excellent deal. I swear the vast majority of these products...

No, I've never noticed any issues with them. As a lift they work just fine. If I recall correctly, in one of his videos TRD Jon or one of the other Youtube guys mentioned some harshness every once in a while but those guys are idiots flying across the desert at 50mph and that's the only time...