Search results

I think I got most of the options... ;o) -Juicebox -Interior lighting -roof vent fan -grab handles all around -bed ladder -solar panel wiring port (2, one for solar wiring and the other for the potential of a light bar in the future) -awning mounts -diesel heater port -rear pass through window...

Ha! I literally just got done wiring it 15 minutes ago before reading this. I don't know if there is an easier way but I had already installed this a couple of weeks ago so I could have a separate four way plug to plug my rear light bar in without having to cut any wires. For the third...

I haven't seen any of these vendors make any of their products to follow contour lines for any specific vehicle. These are small companies filling a niche market. They design a single product and tweak the width and length to fit each vehicle but changing the angles would require entirely new...

I was joking that I bought a camper to allow me to get out in the wilderness as far from humanity as possible and then the first two days were spent with five hundred of my closest friends. I was bored within hours. The NW rally is tiny compared to the other overland rallys but I don't feel a...

That's correct. That would be where I'll feed hot air in from the diesel heater (which sits outside). There is also a flap on the tent portion that I can use as a return to the heater to recirculate the heated air if it gets really cold out. I'll take a couple more pictures of that and the...

Thanks! LP had the option of gray or tan tent material and obviously I went with gray which imho looks perfect. I've seen multiple videos now of GFC campers on the 4th gen as well as at least one other manufacturer and none of the videos show that they do anything to address the tailgate lip...

I was going to mention that and forgot. I wish I had easy access to a scale so I could be more scientific about weight but LP estimates the build to be ~375 lbs. Obviously adding options adds weight but that feels about right. The awning is another ~75 lbs so I'm pushing 450 and now I start...

I'm guessing you didn't weigh them both but it seems like there's probably a substantial difference in weight between the stock muffler and the AFe, coupled with more weight savings due to the axle dump vs. full extension? What's your gut feel on the weight difference? Weight might be more...

After installing the Wescott kit on my OR LB I was almost 1.5 inches of rake still from front to rear and that's three weeks and 1,000 miles after the install so everything should be fully settled. I got my wedge camper and batwing awning, which together add ~450lbs, installed last Friday and...

I'm curious as to why the storage box only appears to be using half the space available? From the photos it looks like you easily could have made the storage box bigger. From your Amazon listing the area is 2.7 inches x 5.5 inches but there's much more space available than that in the void.

I took possession of the Lone Peak Overland wedge camper I had purchased in Nov '22 this past Friday. Here's a link to the post w/details. https://www.tacoma4g.com/forum/threads/lone-peak-overland-camper-install.5265/

I got my Lone Peak camper installed in Wenatchee, Wa this past Friday. It's a long story but I was order #127. I placed my order in November of '22 during the initial presale event. At the time I had a '16 GMC Canyon but in Feb placed a deposit on my TRD OR LB. Basically I was waiting on...

Wescott just posted a good video showing the installation. The rear starts ~16:00. I'm not sure why Wescott has you removing the shock from the top mount. I took the bottom bolt out and that seems easier to me. I had to do both, unbolt the sway bar and remove the spring. I don't think...

Yes, but Go Rhino does offer a frame mount option for all their boards. It's more expensive though and states that it requires drilling which is odd considering that the frame has threaded holes ready to go. I'm guessing it's some generic design to fit multiple vehicles. I'm happy with my...

Another potential option, https://www.anytimebackupcamera.com/. I've talked to them and was told the problem they're having is that Toyota went with a new plug into the back of the head unit and the aftermarket vendors haven't so far been able to source it. It's just a matter of time...

Pliers should fit. It's a pretty straight shot.

Comparison between the two versions...

I changed my oil this past week at 1,500 miles. Didn't see any metal, but then didn't filter it or look that closely. I don't recall what you need to remove the drain plug but it's somewhere around a 15 or 17mm socket. From the factory the oil filter was on very tight. There was no way I...

I have a Lone Peak Overland camper shell on order. They have a "dust killer" vent built into the camper that is supposed to provide positive air pressure in the shell and help prevent dust from coming in. For this conversation though the point is that Lone Peak positions the vent over the...

What's the difference between the ones you linked and these? I have the T3's and they're great but when shopping on Amazon you have multiple bulbs that appear to be very similar and no way to compare them to each other. It's very hard to be an informed shopper with generic terms like "300%...