Taco Specific Bumper Step - Easy Install and $50 From Amazon

[swanneemtb]

Hey Taco-heads,
I may be late to the game here but I wanted to share this in case some else (like me) missed it. I saw this step on another Taco and bought one right away. $50 on Amazon - 3 bolts attach the yoke to the unit, then 3 bolts attach the unit to the frame. There is a spot specific to this step and its a simple process. Its a bit tight and ratchet wrenches would have worked better than the open/closed end wrenches I used as the space is very small so getting a good rotation is tough. Enjoy!

Sponsored

 

[minjaeisgone]

do you have a link to the bed step that you ordered? I just ordered the SXTH element relocation bracket for my 24 TH and was wondering if it would work

 

[swanneemtb]

Hey MJ, here's the link. https://www.amazon.com/dp/B0F36WZHF6?ref=ppx_yo2ov_dt_b_fed_asin_title

its a pretty simple install, but, like mentioned above, the space is pretty tight. If I had used a ratchet wrench, it would have moved much faster on the install. Let me know if you have any questions.

 

[minjaeisgone]

Thanks! I will have to give it a try. Since the ARB recovery point is blocking the OEM installation points, I am hoping this will fit the relocation bracket. I see a few reviews that says it worked.

 

[swanneemtb]

Cool, good luck and hope it works for you.

 

[SXTH Element]

Thanks! I will have to give it a try. Since the ARB recovery point is blocking the OEM installation points, I am hoping this will fit the relocation bracket. I see a few reviews that says it worked.

It should work just fine. Please reach out and let us know if you have any questions or concerns.

Sponsored