Toyo Open Country 35x11.5 on OR Factory Lift +25 offset?

[iAmTheDank]

Anyone know if the Toyo Open Country 35x11.5 fit without rubbing? I know the 285/75/17 fit and they are 33.9" vs the 34.5" which seem like they should but I haven't seen any posts on this.

Sponsored

 

[MT-Taco]

I would be surprised if they didn’t.

 

[iAmTheDank]

I would be surprised if they didn’t.

That's what I'm thinking I just havent seen anyone on here mention that size. I know weight is a big consideration so maybe thats why

 

[MT-Taco]

That's what I'm thinking I just havent seen anyone on here mention that size. I know weight is a big consideration so maybe thats why

35X12.5 fits with minor front wheel well trimming and crash bar removal for full flex. thinking you might be OK?

 

[iAmTheDank]

35X12.5 fits with minor front wheel well trimming and crash bar removal for full flex. thinking you might be OK?

I think so. I'm getting new wheel next month when I get back from vacation. If I get these I will update

 

[Airborne]

I have toyos on my truck, its a hybrid TRD Offroad, already had oem, 18” wheels, its about 1 ince higher then non hybrid, i then put a westcott, level lift on truck and i put trail hunter wheels on truck, my tire size is 295-70-18, i removed the crash pad, and shaved a 1/32nd on front iner bumper, plastic…fits very good lock to lock, flex and bumps are fine, had gone next size bigger then i would of needed more trimming, based on this experiance im guess its going to be a little tight tucking those tires and offset into a stock trd …..good luck. Some say no issues , hopefully it goes smooth for you…..
David

 

[iAmTheDank]

I reread what you wrote and want to clarify. I am not talking about the factory stock suspension but rather the factory fox lift. Beautify truck btw

 

[Airborne]

Ohoh, then thats going to give you some lift, my apologies, didnt realize you were able to get the factory lift,….that probably will be doable then, im curiouse, the specs on factory lift are, 2-2 1/2. Lift from what i heard, i still think you will need to remove crash pads,

 

[iAmTheDank]

Ohoh, then thats going to give you some lift, my apologies, didnt realize you were able to get the factory lift,….that probably will be doable then, im curiouse, the specs on factory lift are, 2-2 1/2. Lift from what i heard, i still think you will need to remove crash pads,

You might be right. Your tires are 34.3" and 11.8" in width vs the 34.5" and 11.4" on the 35x11.50r17 its the closest comparison, I think. How much more lift does the wescott design level kit give you?

 

[Airborne]

westtcot will be about 2 1/2 in front and 3/4 in the rear , its solid and great quality, levels the truck stance very nice. , i remember going through same thing as you, tires and wheels are pricy, do a search here theres several very good guys to talk to , plenty of truck pictures …keep us posted i look forward to seeing the outcome of your choice
David

Sponsored