TRD Pro interior dash trim part numbers

[JayTech]

Is 55320-AK020-G0 the Trailhunter glove box? If so, do you know the part number for the TRD Pro that is black with the red stripe? I think thats a thing.

TIA!

Yea that should be the number for the Trailhunter box. The part number for the black Pro glovebox should be the first glove box number I posted: 55320-AK020-C0. I gave this part number instead of the red box number due to a description error.

Sponsored

 

[px3_taco]

Yea that should be the number for the Trailhunter box. The part number for the black Pro glovebox should be the first glove box number I posted: 55320-AK020-C0. I gave this part number instead of the red box number due to a description error.

Awesome, these are very much appreciated!

 

[joseph777]

Alright I wanted to ask:
I just realized that the TRD PRO Dash vents and AC control trim is a flat black

any possible way to get the part numbers for these?

Is the AC control trim by the radio screen a separate piece or would have to buy the ac controls with it as well?

 

[joseph777]

Alright I wanted to ask:
I just realized that the TRD PRO Dash vents and AC control trim is a flat black

any possible way to get the part numbers for these?

Is the AC control trim by the radio screen a separate piece or would have to buy

 

[px3_taco]

Swapped the steering wheel today.

 

[joseph777]

Swapped the steering wheel today.

Just wrapped up the dash install!

 

[px3_taco]

Just wrapped up the dash install!

How was the install? I have the piece but it was a little cold and I was concerned about the clips being brittle.

 

[joseph777]

How was the install? I have the piece but it was a little cold and I was concerned about the clips being brittle.

Honestly? 15-25 minutes?
There’s a plastic cover behind the radio. Remove that with a plastic pry tool, remove the 4 10mm bolts and slide the radio out the way. Open glove box and just push down the two side pieces by the dash and push the one down by the steering wheel and she comes right out

drivers side pops off with just the pry tool

 

[px3_taco]

Got the trim piece in. It looks so much better. I think I will eventually black out the rest and swap the glove box.

 

[joseph777]

Got the trim piece in. It looks so much better. I think I will eventually black out the rest and swap the glove box.

Looking great!

what kind of mirror do you have?

 

[px3_taco]

Looking great!

what kind of mirror do you have?

Wolfbox

 

[joseph777]

Got the trim piece in. It looks so much better. I think I will eventually black out the rest and swap the glove box.

The dashboard and the interior just looks so much better with the TRD PRO parts. Glad we figured out a way to do this without having to buy a pro.

now on to a leveling kit and 295s!

 

[turnermier]

Can anyone help find the part number for the black leather glovebox on the limited with black interior..


So far I have come up with these


55320-AK020-C0 - BLACK RED (Black with red stitching? TRD PRO)
55320-AK020-B1 - LT GREY
55320-AK020-C2 - BLACK with bronze stitching
55320-AK020-D0 - SENSUAL RED (The TRD PRO red glove box)
55320-AK020-G0 - MINERAL

 

[turnermier]

Can someone also help find the black leather center console lid with the gray stitching?

 

[turnermier]

I wonder if the 4runner door panels would fit. They are black leather with gray stitching perfectly matches the Tacoma black leather interior.

Here is the passenger side on the 4Runner

Sponsored