Old Man Emu 3320 rear coils - anyone installed?

[vanhuette]

Hey has anyone thrown on the 3320 yet?

I am looking for a rear coil upgrade to support the constant 200-250 lb and occasional 500 lb load im running. Not looking for a big lift over stock, but currently the truck is basically leveled due to back end sag with the 250lb weight and fully nose up when I load it down.

The dobinsons C59-817V seemed like a perfect option but it’s out of stock everywhere. Local dealer has a OME 3320 but I can’t find any info about people who have them or the expected lift (if any) and ride quality.

Sponsored

 

[Nor Cal Taco Off Road]

Just installed a set this afternoon to support the weight of my RTT and Bed Rack, as I was on the bump stops almost constantly before (RTT is fairly heavy). Seems to have hit the mark, but I'll have to report back after some time (just did a 10 minute test drive tonight). Installation was really easy.

 

[Space Taco]

Just installed a set this afternoon to support the weight of my RTT and Bed Rack, as I was on the bump stops almost constantly before (RTT is fairly heavy). Seems to have hit the mark, but I'll have to report back after some time (just did a 10 minute test drive tonight). Installation was really easy.

How has the ride been with the 3320s?

 

[jetengr19]

I have the 3320s installed on my Trailhunter. I have probably around 350 lbs constant load in my bed. I didn’t measure the factory ride height. It was noticeably sagging. The 3320 springs raised the loaded bed about 2 inches.

The ride quality is pretty much the same as factory.

Sponsored