Secret Cubby Organizer 3D Print DIY (STL included)

[MrB4D]

I got bored on a 5hr flight and figured I would make the "secret cubby" organizer. The main things I wanted to store are the lug nut key and a spare battery for the key fob (and card fob). I was also able to fit in a Leatherman Sidekick (though I'm sure other small multitools would fit). On the back there is a cut out for 2 command strips to help hold this in place (some velcro strips would work too, though they might need some trimming). I added some moleskin to the inside of the upper Leatherman cutout to help hold it into place and help silence any rattling. I think a slot or 2 for keys would be a good option, but with how easy it is to break into vehicles, I thought it might be better to not include it... STL included so you can add yourself if you think it is an acceptable risk.
NOTE: the point of this organizer is not to be something you use daily, just something you use in a pinch (key fob/headlamp goes dead, wire needs cut, etc)

STL image

Installed Image

(Black plastic doesn't photograph as nice as the grey stuff from the other post, sorry!)

Some notes:

• Command strips do not stick to the plastic in the cubby very well
• A layer of moleskin on each side of the Leatherman stops it from shaking (maybe have it wrap around to the front of the organizer to stop fraying and improve longevity)
• I removed the pocket clip on the Leatherman to help it fit better
• Getting batteries out is a little challenging, but with command strips (or velcro) pulling out the organizer isn't an issue

Potential modifications:

• Adding an angle/champers to help guide the multitool in
• Key slot (at your own risk)
• Slots for some common socket sizes
• Socket wrench or screwdriver with different tips
• Flashlight
• Air Tag/Pixel Tag (go Android) if you forget your parking spot often
• CR123 batteries

Enjoy! And if you make some changes take a pic and share!

Sponsored

 

[Sagebrush]

That's a helluva lot fancier than the one I designed.

 

[MrB4D]

That's a helluva lot fancier than the one I designed.

Very nice! I like how yours holds the knife and has an easy grab handle

 

[Sagebrush]

Very nice! I like how yours holds the knife and has an easy grab handle

Thanks. I just need to have a need to use it now. ;)

If you change your own oil, here's a device I designed that keeps the oil off the frame member under the filter:

https://www.thingiverse.com/thing:7393633

 

[TexasBlueCrush]

MrB4D that is absolutely amazing. Now ya got me thinking.....

 

[MrB4D]

MrB4D that is absolutely amazing. Now ya got me thinking.....

Thanks. I see this as less useful than the center console organizer from a few weeks back. It can be tricky to get the batteries out without pulling the whole organizer out. I think ergonomics could be improved by using 1 type of battery (AA, AAA, CR123) and installing next to each other with a little more space between them. Dang that ease of use/space trade off.

I hope you're inspired to improve on it or make something else! Tag me if you do!

 

[ScottyMcfly]

Thanks. I just need to have a need to use it now. ;)

If you change your own oil, here's a device I designed that keeps the oil off the frame member under the filter:

https://www.thingiverse.com/thing:7393633

This one i need to print.

 

[TexasBlueCrush]

Thanks. I see this as less useful than the center console organizer from a few weeks back. It can be tricky to get the batteries out without pulling the whole organizer out. I think ergonomics could be improved by using 1 type of battery (AA, AAA, CR123) and installing next to each other with a little more space between them. Dang that ease of use/space trade off.

I hope you're inspired to improve on it or make something else! Tag me if you do!

You have and thanks. I spent half the night trying to build on your idea for that round cubbyhole in my 2024 Taco. I'm more of a "prepper" kind of guy and I was thinking of stashing a micro hand crank am/fm emergency radio, a mini Bic lighter, and a couple of other things. Kind of what i keep in my pocket every day. I'm headed to Lowe's later today and see what i can find. You're onto something great. Thanks for sharing.

 

[MrB4D]

You have and thanks. I spent half the night trying to build on your idea for that round cubbyhole in my 2024 Taco. I'm more of a "prepper" kind of guy and I was thinking of stashing a micro hand crank am/fm emergency radio, a mini Bic lighter, and a couple of other things. Kind of what i keep in my pocket every day. I'm headed to Lowe's later today and see what i can find. You're onto something great. Thanks for sharing.

Ahh, that's awesome! Can't wait to see what you come up with

Sponsored