Striking out-Mudflaps for the 2025 Tacoma TRD Pro (w/fender flares)

[RED1]

I used a block of steel, it would suck the heat out and help set the shape.

Sponsored

 

[Ray T]

Noted!

 

[Real NEK]

Thanks to everyone for the help - I did end up going with the ARKs. The Toyota.ca site was not easy to navigate - I'll just wait to see if the OEM part comes out. Thanks all!

 

[AZTaco]

The Toyota.ca site was not easy to navigate - I'll just wait to see if the OEM part comes out. Thanks all!

You don't have to go to toyota.ca. Google PK389-35R50-P1 and you will get a dozen dealers/vendors.

 

[Real NEK]

You don't have to go to toyota.ca. Google PK389-35R50-P1 and you will get a dozen dealers/vendors.

Oh, ok - thank you, that's super helpful, didn't realize it would be that easy. Thanks!

 

[TRD DON]

I have the Canadien Mudflaps on my PRO and have had zero issues, I did remove the lower PPF and raised it about 1/3 up the side of the truck w XPEL PPF

 

[Real NEK]

I have the Canadien Mudflaps on my PRO and have had zero issues, I did remove the lower PPF and raised it about 1/3 up the side of the truck w XPEL PPF

Do you mind sharing the vendor you sent through? I tried one and the order was voided because the part was discontinued. Thanks in advance.

 

[TRD DON]

here's a link and they are on sale for $100.00

https://parts.autonationtoyotagulff...p-pk38935r55p1?c=az0xJnE9UEszODktMzVSNTAtUDE=

 

[TacoFreak]

here's a link and they are on sale for $100.00

https://parts.autonationtoyotagulffreeway.com/oem-parts/toyota-tacoh-mudg-4p-pk38935r55p1?c=az0xJnE9UEszODktMzVSNTAtUDE=

Cool - that is the best price I have seen so far.

I'm very happy with my Canadian flaps and I like the Tacoma letters on the rear ones.

 

[pepco]

here's a link and they are on sale for $100.00

https://parts.autonationtoyotagulffreeway.com/oem-parts/toyota-tacoh-mudg-4p-pk38935r55p1?c=az0xJnE9UEszODktMzVSNTAtUDE=

That's a new part #, wonder if anything changed? The other # was R50-P1.

 

[TacoFreak]

That's a new part #, wonder if anything changed? The other # was R50-P1.

Good question. That R50-P1 was for the wider of the two available, which is what fits a Pro or TH. The ones that ended in R00-P1 fit the narrower flaps. I wonder how this new part # compares.

 

[AZTaco]

Obviously the new 55s are 10% wider than the 50s.

 

[pepco]

Obviously the new 55s are 10% wider than the 50s.

then that would be too wide for my liking, the 50s fit my Pro perfect.

 

[Real NEK]

here's a link and they are on sale for $100.00

https://parts.autonationtoyotagulffreeway.com/oem-parts/toyota-tacoh-mudg-4p-pk38935r55p1?c=az0xJnE9UEszODktMzVSNTAtUDE=

Great. Makes sense with the replacement part. Appreciate the help. Thank you.

 

[Real NEK]

Great. Makes sense with the replacement part. Appreciate the help. Thank you.

Update on this. Apparently they’re on back order so need to wait a couple of weeks.

Sponsored