Tacoma Kits that are a must have & new Custom kits for the Tacoma by SPV Parts..

[SPV Parts]

I wanted to showcase a few things that are available for the Tacoma that we offer.

(Please Note that sale prices mentioned are subject to change. They are correct at the time of this writing)

First, the most popular is the ARB Bumper SRL Rear Lights.

There are many threads on the forum already that discuss these and installs and so on. But they are now many pages and I thought this would be a good chance for a clean start. However, I will add the links to some of the other threads at the end to reference.

Lets start with a little history...

In 2024, Rigid released their kit Part #20643 for the Tacoma with the ARB Bumper. This is a LINK to that kit - (LINK)

Their kit included these lights Part #53222 (Link) Which cost $304.99

And they include this harness which crimps directly to the lights without connectors and one 2 pin connector which only works for the 2024 models. So that's an issue for the 2025 and 2026 models. It also just has a loose wire for the backlights with no clear way to connect the red backlight.

So that's the issue with the original Rigid kit. The wiring is sub par for the application for an extra $95 and even with that wiring. The one connector that plugs into the truck doesn't work for the 2025 and 2026 models because in 2025 up, Toyota added a 4 pin connector in place of the 2 pin one.

(Rigid Harness Image Below)

Problem solved!

So we work direct with Rigid and we produce several products to work in conjunction with their products. Including our plug n play harness system and components.
We also work with other enthusiasts and members on here and other forums to fill in the gaps or come up with custom solutions that may not exist. Some members we have worked with on here are @tacorancher @SmokyMtnTaco and @wolfpackwest

So below are the SPV Parts Kit options with the Tacoma ARB Rear Bumper Lights. Our options include the SAME #53222 Rigid lights but our Plug N Play harness options for various configurations.

(LINK) to SPV Parts Tacoma SRL Light Kits for ARB Bumper

So lets break down the options.

The kits include the lights, of course.

You can also pic from several configurations. Such as Reverse Trigger Only. Reverse Trigger with Pass Through only. Both Switch and reverse trigger with Pass Through... 24 or 25 Models.

(You can see the configuration Diagram and install instructions here, with the Harness Diagram on the last 2 pages - LINK)

The MOST popular is BOTH the Switch and Reverse Trigger with Pass Through... It includes these Harnesses-

-"Short Rear Harness with Tail Light Adapter" with "Add on Connectors" (LINK) - Sale Price $79.99

-"Tacoma Pass Through Pig Tail Add on (Plug N Play) (LINK) - Sale Price $23.74 for 24 Model & $31.34 for 25 model

So for those of you who have or acquire your own Rigid Lights #53222... You can buy these 2 harness groups... For example - Short Rear Harness w Tail Light Adapter for $79.99 plus $32.34 for the 25 model Pass through Pig Tail, totaling $112.33

But if we look at the sale price of the kit with the lights at $385.17... That means you need to buy your lights for LESS THAN $272.84 all in, because we also have FREE SHIPPING on orders $299.99 and up.

But for Forum members, we also have a discount code - "TACOMAFORUM100". If you use that code, It makes that kit $365.91 with FREE SHIPPING (Or your Harnesses $106.71 PLUS SHIPPING (unless you hit $299.99)

So with the code, you would need to source the Lights somewhere else for UNDER $259.20 to break even with the kit price...

(And we cannot go BACKWARDS and add the code retroactively to refund for the discount code. I am sorry. I hope you can understand. That's why I am telling you about it now. So hopefully you will all see this.)

The discount code is valid for all members on here, on most other things on our site. Not just this kit.

The reason I was explaining this in such great detail is because we do have several people who contact us often and say "I got my lights somewhere else cheaper, and I just need the harnesses." and that fine. As you see, you can buy just the harnesses or the full kit. However, most of the time when they do reach out and tell us how much they got their discounted lights for... its more than $259.20.. So just be aware on where the math comes to...

That said, if you want the kit and you find the same lights #53222 for less that $259.20... You can reach out to us ahead of time and we will attempt to price match them. We always try to do price matches or beat prices. You just need to ask.
What I can tell you is that we can either meet it or beat it or tell you by showing you evidence, that its a scam or its probably legit. There are a lot of people that get taken with scams, spoof sites, etc. Unfortunately there is a lot of that out there right now. We even had an imposter replicate our products on a site years ago claiming to be selling our products at 75% off and just trying to steal peoples money. It happens more often than you know. They pop up all the time. We had it taken down of course and we can help you spot that sort of thing. Then there is of course the legit deal you may find. We can help you confirm.
In short, we want our customers to get the best deal and the best products. Its that simple... We are here to help you, period.

NOTE: As of 3/12/26... We have several of the lights (and kits) in stock. These lights are always sold out. We have them.

Our email is info @spvparts.com

or 317/934/6778

Here are links to some other threads discussing this kit-

https://www.tacoma4g.com/forum/thre...lights-for-arb-rear-bumper-installation.7161/

https://www.tacoma4g.com/forum/thre...tacoma4g-discount-codes-updates-inside.18111/

Sponsored

 

[SPV Parts]

Next, I want to talk about the new PASS THRU Engine Bay Connector Kit.

Many people have asked for this.

The PROBLEM....

While Toyota did a great job with the Pass Thru wires that go to the rear of the truck. The pig tail that have to get them there, in the engine bay, is married to AUX 1 for the 24 or both AUX 1 & 2 for the 25+...

Here is a photo of that connector...

So what we did is create a NEW version with Plug N Play connectors. This will match all of our plug n play harnesses. So Harnesses for A-Pillar Lights, Light bars, ETC... The connectors are on the wires and you can move them around or connect or disconnect any switch.

LINK- to Tacoma Pass Through Connector Kit

(Photo Below)

If you have your own wiring and want to add a connector to it to match up to these. You can get add on connectors to do so. NOTE.. You would want single FEMALE connectors for your harnesses to match - LINK

 

[SPV Parts]

Next, and I will keep this one shorter...

You don't have to have an ARB model to enjoy the Rigid lights.

We have a special version with the SRL lights that bolt just under the standard bumper as well.

Here is a LINK to that kit

(Photo Below)
Note- You can mount them higher up. Just under the bumper. This photo is just how this person liked them. The brackets are slotted.

Again, don't forget to use the "TACOMAFORUM100" Discount Code.

You can also pic from several configurations. Such as Reverse Trigger Only. Full Harness to Switch only. Both Switch and reverse trigger with Full Rear Harness.

(You can see the configuration Diagram and install instructions here, with the Harness Diagram on the last 2 pages - LINK)

If you have switches, and want them on a switch. You are all set.

If you don't have switches, you have several options. Including our simple "Add a Switch" (LINK)

Or The SPOD - (LINK)

Or Switch Pros - (Link)

Again, you can email us at info @spvparts.com

or call or text 317/934/6778

 

[SPV Parts]

Last, We have all the Baja Designs Light Kits, Fang Style S1 Kits, A-Pillar Kits etc

LINK to Baja Kits


We have Several Rigid Kits as well.. Including Some A-Pillar Kits

LINK To Rigid Kits


We also have all the Diode Dynamics Kit

LINK to Diode Dynamics Kits


We have Morimoto Headlights as well

LINK to Morimoto


We have the FORM (Also Diode Dynamics owned) Headlights and Tail Lights

LINK to FORM Lighting


Specialty Connectors such as our Marker Adapter-

LINK to Marker Adapter

Photo of Marker Adapter Below

The Marker adapter is a PLUG N PLAY option to power your Backlights in lights such as the Rigid 360's, Baja LP4 or LP6, and S8.. Diode Dynamics and more.

It can also power your GRILLE marker lights.. Just like OEM.

Its automatic with the parking/running lights and you don't need to cut or splice wires.

Watch this video-



It also plugs right into any of our harnesses from our patented plug n play harness system.

You can build virtually any harness configuration you can imagine for most any vehicle.

Here is a link to the vast array of harnesses-

LINK - Harness System

You can learn more about it on YOUTUBE - LINK 1 LINK 2

As always... Feel free to reach out!

Again, you can email us at info @spvparts.com

or call or text 317/934/6778

 

[TFOUTS]

Hi John, great info as always

 

[SPV Parts]

Hi John, great info as always

Thanks!

Sponsored