USB ports in bed

[CBarclay]

Hello everyone, I have a backcountry trip coming up and just realized my USB ports in the bed are not working. I've checked the 7.5 amp fuse and it's ok. With the truck on I've checked the ports using a working and good cable and have used an air duster to clean the ports. What else should I look at to get these to work?
Thanks!

Sponsored

 

[Miqie]

On a related note, what type of fuse is it? It blew on me several months ago. I took it out meaning to replace it, never did, and now it's lost.

 

[Devleen]

Hello everyone, I have a backcountry trip coming up and just realized my USB ports in the bed are not working. I've checked the 7.5 amp fuse and it's ok. With the truck on I've checked the ports using a working and good cable and have used an air duster to clean the ports. What else should I look at to get these to work?
Thanks!

Check if the 120V AC inverter switch on your dashboard (or the bed panel) is turned on to activate power. Inspect the plug connectors behind the bed panel and test with a multimeter to verify voltage (12V). If power reaches the port but your device won't charge, the internal pins might be unseated.

 

[Rmarin4272]

Hello everyone, I have a backcountry trip coming up and just realized my USB ports in the bed are not working. I've checked the 7.5 amp fuse and it's ok. With the truck on I've checked the ports using a working and good cable and have used an air duster to clean the ports. What else should I look at to get these to work?
Thanks!

Change the fuse anyway. Cheap what if fix if it works

Sponsored