- Thread starter
- #1
Hello everyone! Just got this truck a few weeks ago at 8k miles. It was already built out about how I wanted to build one. I’ll change a few things to how we end up using it. The main functions are getting to places where we are backcountry fly fishing, a mobile fly rod building workshop, hiking, trail running, mountain biking base camp.
I’m looking to make it more efficient and functional (and get better than my current 14.7mpg). I’m considering a tune and or CAI to help with this but don’t know much about them so I’m in the research phase. So any guidance and/or recommendations welcome!
Build details when purchased:
- ICON 2024-2025 Toyota Tacoma 1.25-3" Lift, Stage 3 Suspension System, Tubular, Triple Rate Rear Springs w/ Overland Rear Springs
5 wheel/tire setup
-ICON Alloys Rebound, Bronze, 17 x 8.5 / 6 x 5.5, 25mm Offset, 5.75" BS
- Kenda Klever RT 285/70r17
- 23Zero PEREGRINE PRO 5 ARM 270 DEGREE AWNING
- 23zero Armadillo Horizon 3 Hardshell Left open
- Decked slide out drawer w/premium accessory pack
- Alu cab Contour truck cap 5’
- ALU-CAB LOAD BAR 1250MM KIT WITH STANDARD PROFILE FEET
- Wolbox G900 Tri Pro digital rearview mirror. Dash and rear cam (need to set up the front facing trail camera)
I’ve got less aggressive and lighter tires on order. A friend that owns Send It Overland here in NC (he’s the one that built the truck for the original owner) recommended some Kenda Klever AT2 255 75r17 that I’ve got on order and will install next week. And I’ll hopefully get the tpms sensors to work too.
I’ll probably get a trail pipe exhaust delete pretty soon. Considering some rock sliders and skid plates. First trip to CO is in July. Going to do a shakedown here in
NC soon.
That’s all for now!
I’m looking to make it more efficient and functional (and get better than my current 14.7mpg). I’m considering a tune and or CAI to help with this but don’t know much about them so I’m in the research phase. So any guidance and/or recommendations welcome!
Build details when purchased:
- ICON 2024-2025 Toyota Tacoma 1.25-3" Lift, Stage 3 Suspension System, Tubular, Triple Rate Rear Springs w/ Overland Rear Springs
5 wheel/tire setup
-ICON Alloys Rebound, Bronze, 17 x 8.5 / 6 x 5.5, 25mm Offset, 5.75" BS
- Kenda Klever RT 285/70r17
- 23Zero PEREGRINE PRO 5 ARM 270 DEGREE AWNING
- 23zero Armadillo Horizon 3 Hardshell Left open
- Decked slide out drawer w/premium accessory pack
- Alu cab Contour truck cap 5’
- ALU-CAB LOAD BAR 1250MM KIT WITH STANDARD PROFILE FEET
- Wolbox G900 Tri Pro digital rearview mirror. Dash and rear cam (need to set up the front facing trail camera)
I’ve got less aggressive and lighter tires on order. A friend that owns Send It Overland here in NC (he’s the one that built the truck for the original owner) recommended some Kenda Klever AT2 255 75r17 that I’ve got on order and will install next week. And I’ll hopefully get the tpms sensors to work too.
I’ll probably get a trail pipe exhaust delete pretty soon. Considering some rock sliders and skid plates. First trip to CO is in July. Going to do a shakedown here in
NC soon.
That’s all for now!
Sponsored