4th Gen 2024+ Tacoma Aftermarket Wheels & Tires Pictures / Specs Compilation - Add Yours

[JuanitoBonito]

@Yoda_Tacoma How much did you trim with your offset? I have the same but with 285’s. Curious how much more you did than me. Mine was pretty minor.

Sponsored

 

[JuanitoBonito]

25 Off road premium with the upgraded TRD Bilstien lift.
SCS Ray 10 with -10 offset, 17x8.5
285/75/17 KO3’s

 

[Rover31]

24 SR5 stock height
Went from the puny factory to this!

Goodyear Wrangler Duratrac RT
265/70 18
KMC wheels 18mm offset with concentric hub adaptors

 

[brandonmc07]

2024 TRD OR
Wheels: RRW RR5-H 17x8.0 +18 offset
ReadyLift front level
BFG KO3 285/70R17

How is the paint on the bed flares in front of the rear wheels with this offset? Are you getting more chips more than with stock wheel size/offset?

 

[GLT]

How is the paint on the bed flares in front of the rear wheels with this offset? Are you getting more chips more than with stock wheel size/offset?

They haven’t been on long enough to be noticeable yet but yes there will definitely be more rock chips. You’ll notice I also removed the mud flaps front and rear (for looks) so that’ll make it worse.

 

[underground_weaz]

3 1/2” rough country lift
fuel covert matte black 18” ‘0’ offset wheels
venom all terrain tires 285/75R18

How do you like the RC lift? Which shock configuration did you go with?

 

[2battranger]

i went with the M1R front and M1 rear. I’m happy with it. The ride is very good. I haven’t done any serious off roading just rutted out and rough forest roads. But no complaints. The kit I bought was about $1500 total.

 

[JuanitoBonito]

I like the height you have 3-3&1/2 I just wonder if you’ll have the vibration from the needle bearing issue. ECSG has the appropriate replacement for that if you do get vibes.

 

[Bb-sr5]

nitto ridge nomad grapplers with the vader chrome x series 18 inch

 

[ctngo82]

2024 Tacoma TRD Off-Road by Westcott Designs on:

Method 305 wheels 17x8.5 (+25 offset)
Nitto Ridge Grappler A/T 35x12.50
2.5" Lift Kit by Westcott Designs

See original discussion thread:
https://www.tacoma4g.com/forum/thre...-35-tires-2-5-lift-kit-westcott-designs.2093/

How much trimming did you have to do to fit the 35”?

 

[JuanitoBonito]

How much trimming did you have to do to fit the 35”?

It’ll depend on your offset. My wheels are 17x8.5 with a -10 offset. 285/75/17 KO3’s. I had to trim slightly but that’s because of my offset. With a more positive offset you shouldn’t have to cut or trim.

 

[ctngo82]

It’ll depend on your offset. My wheels are 17x8.5 with a -10 offset. 285/75/17 KO3’s. I had to trim slightly but that’s because of my offset. With a more positive offset you shouldn’t have to cut or trim.

Thanks, Juanito! I just purchased the RRW-RR-7 Hybrid headlock wheels, which are 17x8.5 with a +25 offset. I’ve been on the lookout for C load-rated tires, but it’s been challenging to find the right size. I came across some Goodyear Wrangler Territory tires in the 315/70/17 size at a great price. Trying not to cut into my baby.

 

[JuanitoBonito]

Thanks, Juanito! I just purchased the RRW-RR-7 Hybrid headlock wheels, which are 17x8.5 with a +25 offset. I’ve been on the lookout for C load-rated tires, but it’s been challenging to find the right size. I came across some Goodyear Wrangler Territory tires in the 315/70/17 size at a great price. Trying not to cut into my baby.

I get it. I really didnt want to cut either but what I had to do was very minor. I’ve been in this same spot before and felt comfortable with my decision. Cutting/trimming a new vehicle is always a little stressful. You should be just fine with that offset.

Sponsored