Cannot find pass through for running lights on Rigid 360s

[tacorancher]

Hey guys - SPV gave me a pass through harness to get my Rigid A pillar ditch lights to run on the running lights for the backlights. While I got aux to work the running light harness doesn’t connect to any of the plugs in my headlight. It’s the wrong connector it seems. Have no clue how to get the running lights looped in. Any ideas? This harness is the same as the rear aux 1 pigtail so I’m not sure where it would go???

Sponsored

 

[Rubenc87]

Are you running this for the arb bumper

 

[tacorancher]

Are you running this for the arb bumper

This is for my backlit ditch lights - so trying to find which plug to use in the headlamps to draw power for running lights, then @SPV Parts will send me the harness to match. Any help greatly appreciated.

 

[Rubenc87]

Oh I see

 

[tacorancher]

Oh I see

Just realized I was clear as mud. Updated my post. Thanks much.

 

[Rubenc87]

Just realized I was clear as mud. Updated my post. Thanks much.

Thanks for clearing it up for me.

 

[Mightyquinn]

Do you have any updates on this?

I just installed some DD SSC2 Ditch Lights this weekend and used that cable to power the amber backlights. The headlight connector is kind of hidden and tucked under the headlight assembly, it threw me for a loop at first too but finally found it.

 

[tacorancher]

Do you have any updates on this?

I just installed some DD SSC2 Ditch Lights this weekend and used that cable to power the amber backlights. The headlight connector is kind of hidden and tucked under the headlight assembly, it threw me for a loop at first too but finally found it.

Yeah - it’s at the very very top

Sponsored