Dash rattle 2024 TRD Pro

[JayhrodTaco]

it’s a MFer to reinstall. I did it once and removed it again because I thought it was that. Now I’m leaving it off. F it

Damm that’s good to know. I’ll keep digging and let you know what I find.

Sponsored

 

[JayhrodTaco]

it’s a MFer to reinstall. I did it once and removed it again because I thought it was that. Now I’m leaving it off. F it

Have you taken off your driver side mirror? I’m wondering if it’s that? I just put a bore scope down the A pillar and everything looked okay from what I can tell.

 

[GMak621]

Have you taken off your driver side mirror? I’m wondering if it’s that? I just put a bore scope down the A pillar and everything looked okay from what I can tell.

Not yet. You think there’s something loose in there ?

 

[JayhrodTaco]

Not yet. You think there’s something loose in there ?

Tested it out and the rattle is still there. Will keep digging and let you know what I find

 

[maxx075]

I have a few that come and go based on temperature. If I were to guess it's just tolerances on the plastic panels that's slightly shrink or expand.

 

[JayhrodTaco]

I have a few that come and go based on temperature. If I were to guess it's just tolerances on the plastic panels that's slightly shrink or expand.

That’s understandable. The consistency of this rattle just drives me nuts everytime I got over a bump. I have a feeling it’s a cable or clip. I’ve removed every panel outside of the dashboard but the rattle still persists. Seems to disappear during longer drives but reappears after the truck has been dormant for a while

Sponsored