Electric Running Boards that fit TRD Pro?

[james cole]

Hello guys,

Not having any luck finding electric running boards for my TRD Pro, Im 6'2'' and truck is a bit to tall for me surely most people have this problem....

Let me know,
JC

Sponsored

 

[Bravada]

Hello guys,

Not having any luck finding electric running boards for my TRD Pro, Im 6'2'' and truck is a bit to tall for me surely most people have this problem....

Let me know,
JC

I really like the electric running boards on my limited, should fit a pro. I assume Toyota sells them as an add on.

 

[Bravada]

There are a few aftermarket options.
https://realtruck.com/c/exterior-accessories/nerf-bars-running-boards/electric/v/toyota/tacoma/2024/

 

[Drunkmonkey]

The rough country e boards will fit the pro, have them on mine. There is a few alterations to their instructions you have to make but they will work.

 

[james cole]

Thanks a lot guys, will look into it...

 

[james cole]

The rough country e boards will fit the pro, have them on mine. There is a few alterations to their instructions you have to make but they will work.

Do you happen to have a picture retracted and lowered?

 

[TacoEd]

@Drunkmonkey - Do you have a list of the alterations?

 

[Drunkmonkey]

Do you happen to have a picture retracted and lowered?

Not off hand will have to get some if you still need them.

 

[Drunkmonkey]

@Drunkmonkey - Do you have a list of the alterations?

It’s not anything complicated.

The ground to go under the hood just goes to the hybrid inverter which is exactly where the battery would be on a none hybrid there’s a nut between the fuse box and the inverter.

the power I just put right to the power going into the fuse box again there is a nut.

under the truck the control box didn’t fit where they say to put it because of the frame / under body differences. If you mount the brackets for the steps the box can be installed in its original intended location however it’ll be on a slight angle instead of straight on that’s it.

Sponsored