WARNING LIGHTS ON AFTER LIFTING FRONT

[760taco]

Hello guys,

I installed the Rough Country 2" M1 Shocks and Upper control arms. These lights came on 1 week after installation. Truck had a 1.5 Leveling kit before and lights never turned on. Took it to dealer and they want $240 for a diagnostic.

could this happen due to the lift?
Thanks..

Sponsored

 

[maxx075]

Yep, that's gonna be the lift.
You'll need to recalibrate your cameras/sensors

 

[760taco]

Yep, that's gonna be the lift.
You'll need to recalibrate your cameras/sensors

Thanks!!

Do you know if this is only done at the Toyota dealer? I called and they want $800

 

[MT-Taco]

Can’t remember the thread? But someone just reset some codes and didn’t have to recalibrate it.

It’s usually caused when your jacking up the front end with the computer “awake” it thinks it was in an accident. Too prevent this place any fob at least 20ft away and wait 15-20 mins before starting the job.

 

[MT-Taco]

https://www.tacoma4g.com/forum/threads/warning-lights-on-after-lifting-front.19006/

 

[PNWkip]

Forgot about Dre.... hell yea. I'm getting old.

 

[tkrum015]

Will disconnecting the battery reset this ? Or does that need to be done before you start?

 

[maxx075]

Will disconnecting the battery reset this ? Or does that need to be done before you start?

It may reset it, but you should be disconnecting the battery before you do any type of work that is remotely related to any of the senors/cameras.

 

[Mtnbikes]

The shop I had install my Eibach system disconnected the battery first. I have had no issues after the fact like your describing. That’s probably what your shop did not do when you had your system installed. Hopefully it works out for you and doesn’t cost a lot.

Sponsored