2025 Black ORP DCLB - Method 703, 285/75/17, Leveled, ARE CX Cap

[existentialshirt]

Update: the camper shell in the photos below is now for sale: https://www.tacoma4g.com/forum/threads/for-sale-camper-shell-are-cx-classic-6-ft-bed.18898/

See below for photos and specs on my build.

• ReadyLift Spacer Kit - 2.5" / 1"
• Method 703, 17x8.5, +35, Matte Black
• Toyo Open Country AT3, LT285/75R17
• ARE CX Classic with Yakima rack
• Toyota OEM Exhaust Axle Dump
• Toyota OEM Bed Step
• ZPrecision Large Cup Holder
• Husky X-Act Contour Floor Liners

Sponsored

 

[dvrgz]

Love the way this ARE shell looks.

 

[Ray T]

Definitely looks like it was a part of the truck well done

 

[bking]

Did you get the tracks for the Rack from ARE or did they come from Yakima? I have almost the same setup, but I want to add a rack in the back for longer items (Kayak)

 

[existentialshirt]

Did you get the tracks for the Rack from ARE or did they come from Yakima? I have almost the same setup, but I want to add a rack in the back for longer items (Kayak)

It’s Yakima branded but I believe ARE sent it altogether as pictured. If you want to ask my installer, you can call DFW Camper Corral in Mesquite TX to confirm.

 

[malore]

Looks incredible! Can't wait to get my +35mm 705's on!

 

[Muckle]

Great looking truck. If you don't mind, can you take measurements from the ground to the bottom of the fenders, through the center of the wheel, for both front and rear?

 

[existentialshirt]

Great looking truck. If you don't mind, can you take measurements from the ground to the bottom of the fenders, through the center of the wheel, for both front and rear?

It’s 39.5” front and 39.25” back. Didn’t get the chance to measure it before the cap went on, that’s probably sinking it the 0.25”. I chose the readylift (1” rear collar) over Westcott (0.75” rear collar) because I anticipated the cap reducing my ongoing rake.

 

[Chris_2025OR]

Looks so good with the LB and shell ??

 

[Airborne]

Truck reeally looks good, think im going to order the exaust dump, seems pretty forward install ? Unbolt old, rebolt the new ? Does it use existing hardware ? Nice job on your truck
David

 

[existentialshirt]

Truck reeally looks good, think im going to order the exaust dump, seems pretty forward install ? Unbolt old, rebolt the new ? Does it use existing hardware ? Nice job on your truck
David

Thanks. Yes doable, had to drop the spare down and twist/tilt the existing exhaust to get it out. Yes, use two stock bolts and rubber hanger. Took 30 mins. Haven’t been able to unload the exhaust pipe… might take it back to a shop to recycle.

 

[existentialshirt]

This CX Classic cap is now for sale: https://www.tacoma4g.com/forum/threads/for-sale-camper-shell-are-cx-classic-6-ft-bed.18898/

Sponsored