Sponsored
Aftermarket mud flaps for TRD Pro?
- Thread starter TacoFreak
- Start date
- Watchers 13
- First Name
- Geoff
- Joined
- Sep 7, 2024
- Threads
- 2
- Messages
- 45
- Reaction score
- 30
- Location
- J Town, NJ
- Vehicle(s)
- TRD pro
I got Rally Armor flaps. I posted pics of my install a couple pages earlier in this thread. Rokbloks also have a set designed for the pro now
So I wanted to update this thread, I finally managed to get the rally armor flaps installed, though it was a pain and the rear drivers side still isn't perfect. Here's some pics. They look good, the black matches the fender flares and the red almost matches the paint.
The rear drivers side was the worst one. You can see how the top screw isn't really seated fully, and the foam spacer isn't sized properly IMO. Of course this was the one I originally started with and the one that gave the most trouble.
The rear passenger went on easier though I still couldn't get the top screw to grab with the included washer, so I ditched it. Note the spacer, DO NOT over tighten the screws over the foam spacers, they're not gaskets, they are there simply to fill that space.The fronts went on ok, though I found it easier to turn the wheels towards the opposite side of the truck for access. There's this space that bothers me in the front but I'm over it, just glad to finally have something on there.
I am close to pulling the trigger - but do these flaps get close to the tire at full lock where those brackets are?
- First Name
- Geoff
- Joined
- Sep 7, 2024
- Threads
- 2
- Messages
- 45
- Reaction score
- 30
- Location
- J Town, NJ
- Vehicle(s)
- TRD pro
Yes they are close. If you're running 35's I think you'll be rubbing. I'm on the stock setup and there's about 5/8" clearance at full lock. I really wanted a set of sliders from rekgen just for more clearance, but they haven't made a set for our trucks yet. They have them for gen 3 and they have universal sets, but I don't like the mesh section. Anyway, maybe check them out if you haven't already and are worried about clearance with the rally armors.
It's a shame these mud guards are out of stock and 
, they're twice as expensive as the Canadian OEM flaps. I wonder is there a way to remove the "RallyArmor" tags off of the flaps?
, they're twice as expensive as the Canadian OEM flaps. I wonder is there a way to remove the "RallyArmor" tags off of the flaps?Sponsored
You can get them blacked out.It's a shame these mud guards are out of stock and
Out of stock with the supplier?
I meant, if you were to buy them from Meraki Autoworks, they're out of stock.
They are in stock if you bought them directly from the supplier. The only difference is the $12 shipping fee from the supplier and *FREE* shipping with Meraki.
Last edited:
- First Name
- Geoff
- Joined
- Sep 7, 2024
- Threads
- 2
- Messages
- 45
- Reaction score
- 30
- Location
- J Town, NJ
- Vehicle(s)
- TRD pro
Yeah they're stupid money. They do have an option with black lettering that looks pretty subtle. https://merakiautoworks.com/product...acoma-black-ur-mud-flap-w-metallic-black-logoIt's a shame these mud guards are out of stock and
Definitely message Josh @MERAKIAUTOWORKS here on the site. They can save you some money. I have no affiliation, just a happy customer.
The reason I want them is they flex. Where I off-road it’s all sticks and branches and high grass. The other brands will get caught and rip off. Just a bummer that they kind of intrude on the wheel well. But I run 33s / 285s. Should be ok.
Sponsored
