Sponsored

Hybrid springs on a non-hybrid?

rybern

TRD Off-Road Premium
Well-known member
First Name
Ryan
Joined
May 21, 2025
Threads
6
Messages
80
Reaction score
52
Location
Albertville, AL
Vehicle(s)
'25 TRD OR, 00 Taco 4wd, '21 Corolla XSE
Has anyone done this? I found some locally that I can purchase for $40 but I'd love to know of someone has some experience with this first. I realize it won't make much sense if your paying someone to do it.

But putting OEM springs on the truck should lift the front a little and would obviously be OEM.

The hybrid trucks sit higher than the non-hybrids due to slightly different springs. I wonder if the hybrid springs might give as much as a 1" front lift.
Sponsored

 
Last edited:

Blue_Taco

TRD Off-Road
Member
First Name
Mark
Joined
Jan 12, 2025
Threads
1
Messages
11
Reaction score
12
Location
DFW
Vehicle(s)
Tacoma
Bringing up an old thread.

I hadn't thought of doing this but would like to see if it works as a factory option for a small lift.
 
OP
OP
rybern

rybern

TRD Off-Road Premium
Well-known member
First Name
Ryan
Joined
May 21, 2025
Threads
6
Messages
80
Reaction score
52
Location
Albertville, AL
Vehicle(s)
'25 TRD OR, 00 Taco 4wd, '21 Corolla XSE
Bringing up an old thread.

I hadn't thought of doing this but would like to see if it works as a factory option for a small lift.
I ended up going with All Dogs Offroad springs front and rear because it was predictable. I still think the hybrid spring will work and if someone can get them cheap enough, its probably a good option for a mild 1" lift.
Sponsored

 
 






Top