MQ's 2025 TRD Pro Ice Cap/Cockpit Red Build

[pepco]

Got a little more done today after work. Decided to decontaminate the paint and clay it for preparation for sealing the paint. Also installed the "TRD Pro" tailgate inserts after all that was done.

You would be surprised at how much contamination is on or in your paint straight from the factory!!

All the black/purple specks you see are iron or metal particles in your paint that you can't see with the naked eye. I used Griot's Heavy Duty Wheel Cleaner as it was what I had on hand but it's basically the same thing as their Iron and Fallout Remover and is perfectly safe for paint. There is a chemical in it that reacts with the iron particles and turns them purple.

Here is the Tailgate:

Hey, take a look under the front of your ISO dynamic seats and see if there is any surface rust on metal parts? I have a 2025 in Mudbath and noticed it on 2nd day. It's not bad but it's there. Wondering how common it is.

Sponsored

 

[Mightyquinn]

Hey, take a look under the front of your ISO dynamic seats and see if there is any surface rust on metal parts? I have a 2025 in Mudbath and noticed it on 2nd day. It's not bad but it's there. Wondering how common it is.

I just checked and there is very little rust at all, I mean 1 or 2 small spots and that's about it. My truck was built on the 26th of March if that helps any.

 

[Mightyquinn]

Got some more parts installed yesterday. The Rough Country Hard Roll up cover got delivered yesterday so I went ahead and installed it. Took about an hour or so after I figured a few things out, the instructions are decent but could be a little more detailed especially for the novice people who aren't use to working on things. Everything went together fairly easily, just had to adjust it a little bit to get it to lock and align with the tailgate. Not sure how waterproof it's going to be just yet as there seems to be a gap on the passenger side tailgate area where the seal doesn't seem to go all the way. I'm sure I can fix that with some foam rubber gasket. It came with a foam gasket that they want to to put on the top of the tailgate which helps seal it but there is NO WAY I'm doing that so I might have to engineer something if it becomes an issue. So far the cover seems like a quality product and looks nice too and is pretty easy to use but time will tell.

I also installed the Ark Mud Flaps and Front Splash Guards. That too took me about an hour each on the Mud Flaps and Splash Guards. Once you figure things out it goes pretty fast and easy. Didn't have to take any wheels off either. I think they both add a little extra to the truck and clean things up quite a bit plus I can have piece of mind knowing the paint is going to be protected from rock and debris, now I just need my rock sliders for that extra bit of protection. The splash guards are nice and really seal up that area in the front wheel wells while still showing off the TRD Pro suspension components.

 

[Ray T]

Looking good I think I’m going to have to invest in those splash guards

Sponsored