Taco Bed Unistrut/Channel` Spring Nut Source

[swanneemtb]

Has anyone found a source for spring-nuts for the unistrut/channel in the bed? I've looked all over and even at the Toyota website AND asked at the service department at my dealer and no go. Its smaller than the standard unistrut we used in construction but can't find anything and hoping maybe someone out there has found it.

Sponsored

 

[Reconsnake]

If you mean just the nuts for the T-Slot, I used these https://a.co/d/0fOZcA6g

 

[TacoBirdinNW]

Yea if those are what you're talking about

I used these https://a.co/d/0fVkBQz2



Mounted a shovel, axe, shelf, with pieces from that kit and these

https://a.co/d/04jjnqyO

 

[swanneemtb]

Those will def do the trick...don't know how I missed them. But, after I posted thus, I did another search, found those but found these too - https://www.gzila.com/products/bed-...E3h00rStQNm_o-LgjigvEqh8Tk_95G44aAqGtEALw_wcB

The easy thing about these (just like the spring nuts for unistrut) you just put them where you want them, twist them and tighten down. The others, although not THAT difficult, you have to slide them in from the end and if there is anything else that is attached along they way, that has to be disconnected. The problem is they are $4.75 apiece, vs unistrut spring nuts at about .25 cents each.

Sponsored