Westscott pre collar lift install shop in Socal?

[jorge98thhh]

Any recommendations of any shops in SoCal that are familiar with Wescott designs pre collar lift? Looking to install, will be supplying parts. Got quoted $800, does that sound right for the price?

Sponsored

 

[RicosTaco]

You can use your ZIP code on the Wescott Designs website to find distributors that not only sell their products but also offer installation services. If your budget allows, opting for professional installation ensures the job is done by experienced technicians. From my experience, installing a Wescott preload collar lift and wheels took only a few hours, with the longest part being the wheel alignment process. Also, Wescott designs customer service is outstanding, I'm sure they'd be more than willing to help as well.

Now go get that lift installed and enjoy your awesome truck???

 

[jorge98thhh]

You can use your ZIP code on the Wescott Designs website to find distributors that not only sell their products but also offer installation services. If your budget allows, opting for professional installation ensures the job is done by experienced technicians. From my experience, installing a Wescott preload collar lift and wheels took only a few hours, with the longest part being the wheel alignment process. Also, Wescott designs customer service is outstanding, I'm sure they'd be more than willing to help as well.

Now go get that lift installed and enjoy your awesome truck???

thank you so much, this definitely helps a lot! question what are you running for tires & wheels

 

[RicosTaco]

I'm running Method 703’s with a +35mm offset on Bf Goodrich’s Ko3s at 285/70R17 The poke out is just right for me.

 

[jorge98thhh]

I'm running Method 703’s with a +35mm offset on Bf Goodrich’s Ko3s at 285/70R17 The poke out is just right for me.

That thing is looking spiffy clean!! I’m shooting for something like that with a topper

 

[RicosTaco]

You've to post your truck once you finished installing all your gear! Can't wait to see it!?? I know it's going to be sick!

 

[dvrgz]

I'm running Method 703’s with a +35mm offset on Bf Goodrich’s Ko3s at 285/70R17 The poke out is just right for me.

Sorry I may have missed this, what lift are you running ? Looks perfect ?

 

[RicosTaco]

@dvrgz, I've Wescott Designs preload collar lift kit. 2.50” on the front .75” on the rear. Hope this helps?? it was a fun install.

 

[BearTacos]

@dvrgz, I've Wescott Designs preload collar lift kit. 2.50” on the front .75” on the rear. Hope this helps?? it was a fun install.

For the guys running the collar system, have you put any weight in the bed? I'm curious if the truck would have a bad reverse rake to it. My bed is normally empty but will put 700 lbs in it for hunting trips.

 

[JED]

For the guys running the collar system, have you put any weight in the bed? I'm curious if the truck would have a bad reverse rake to it. My bed is normally empty but will put 700 lbs in it for hunting trips.

In my case the coil springs settled out from 1/4” to a 1” rake after a few months. I’m OK with that.

 

[jorge98thhh]

You've to post your truck once you finished installing all your gear! Can't wait to see it!?? I know it's going to be sick!

Finally got it done!
Westscott design pre collar
Rrw 17 with nitto grappler 285/75/17

no rubbing but they did remove the guards and mud flaps

 

[slater]

Im running their collar on 275 75 17 Falkens, since November...
Didnt have to touch the crash plates....

 

[RutsyBucket]

Looks like my friends old place in Venice. Looks good, can't really tell because its so dark!

Sponsored