What would be your first 3 mods after ownership ?

[MJB4450]

1. OEM tube side steps (cuts down on door dings in parking lots and keeps rocks from hitting the bedsides
2. Installed the three parts to make the tailgate dampened
3. Put on takeoff 18" OEM wheels and got rid of those fugly 17" silver Pep Boy's specials the factory put on

Tint was installed at the time of purchase. I don't consider that a mod since here in Southern Arizona it's mandatory if you don't want to become a lump of charcoal after driving around for a few minutes.

Sponsored

 

[TX-MD]

1. OEM tube side steps (cuts down on door dings in parking lots and keeps rocks from hitting the bedsides
2. Installed the three parts to make the tailgate dampened
3. Put on takeoff 18" OEM wheels and got rid of those fugly 17" silver Pep Boy's specials the factory put on

Tint was installed at the time of purchase. I don't consider that a mod since here in Southern Arizona it's mandatory if you don't want to become a lump of charcoal after driving around for a few minutes.

can you share what 3 parts you’re referring to that dampen the tailgate.

 

[lauren01]

1. Tires/wheels
2. Window tint
3. Suspension

2-yes yes yes. My purchase of the PPF job included interior tint. Did 70% all around.

 

[MJB4450]

can you share what 3 parts you’re referring to that dampen the tailgate.

66102-AK020, Hinge Tailgate End
68961-0C080, Joint Back Door Stay
66140-AK011, Support Assy Tailgate Lt Side

Check out this thread from another Forum for instructions and tips.
https://www.tacomaworld.com/threads/sr-sr5-tailgate-damper-assist-anti-drop-strut-install.856169/

Sponsored